Product category:
R&D, Test and Evaluation Services
News Release from: Flomerics | Subject: EFD.Lab
Edited by the Processingtalk Editorial
Team on 16 October 2006
Actaris designs novel gas meters using
EFD.Lab
Actaris used EFD.Lab computational fluid dynamics (CFD) software from Flomerics to design their new innovative gas meters, which use fluidic oscillator technology
Actaris used EFD.Lab computational fluid dynamics (CFD) software from Flomerics to design innovative gas meters Actaris fluidic meters work on a unique principle of putting an obstacle in the flow stream and using a sensor to measure the resulting oscillations to determine the flow rate
This article was originally published on Processingtalk on 3 Jul 2008 at 8.00am (UK)
Related stories
Optimising sail design using 3D simulation
Finnish sail maker WB-Sails is using EFD.Lab fluid dynamics simulation software from Flomerics to develop and optimise sails for Star and Finn class Olympic sailboats
Simulation reduces extractor hood design time
Marenco AG used the Flomerics EFD.Lab engineering fluid dynamics software to halve the design time for a new extractor hood, specified by one of their clients
"EFD.Lab enabled Actaris engineers to quickly and accurately simulate the flow velocity, direction and pressure, making it possible to evaluate new design concepts without the expense and leadtime required to build multiple prototypes," said Ibne Soreefan, Project Manager for Actaris: "EFD.Lab also provided far more diagnostic information than can be obtained by testing a prototype, enabling engineers to move more directly to an optimised design." Actaris is a world leader in the design and manufacturing of meters and systems for the electricity, gas, water and heat markets.
The Actaris Dattus fM2 gas meter is based on the fluidic oscillation principle.
The gas flow is divided to eliminate upstream disturbances then recombined and directed against an obstacle.
Further reading
Saipem UK selects EFD.Lab Fluid Dynamics Software
Saipem UK has selected the Flomerics EFD.Lab engineering fluid dynamics software for the analyses of transportation barges, construction and drilling vessels, and deck structures
Optimising gas burners on industrial air heaters
Eclipse Combustion used EFD.Lab, a general purpose engineering fluid dynamics software from Flomerics, to quickly design and optimise a large industrial air heater with burner in record time
The jet oscillates back and forth and thermal sensors detect temperature variances as the jet oscillates.
The volume of gas passed through the meter is obtained by counting the number of oscillations detected by the sensors.
This innovative design is very compact and has no moving parts so it lasts longer and requires less maintenance than competitive designs.
Actaris engineers faced difficult challenges in developing this unique design.
For example, it is important that the flow pattern within the meter be the same over a wide range of flow rates in order to maintain accuracy of the meter over this range.
Building and testing prototypes makes it possible to evaluate the accuracy of the meter but does not show the flow pattern so it is difficult to determine the cause of inaccuracies.
Actaris engineers previously used CFD software whose cost was so high that it squeezed the engineering budget.
They switched to EFD.Lab after Flomerics support engineers demonstrated that they could provide the same accuracy as the high-end software at a fraction of the cost.
EFD.Lab also requires considerably less time to simulate gas meter flow.
In designing the Dattus fM2 meter, Actaris engineers evaluated a wide range of concept designs using software prototypes.
They visualised the flow inside each design at flow rates that covered the meter's entire application range.
They viewed the flow development as the flow rate increased and the flow moved from laminar to turbulent.
They observed vortices and followed how they changed over the flow rate.
"These simulations helped us visualise the flow and understand the sensitivity of the meter to key design parameters, and thus converging toward the optimised prototype in less time". Request a free brochure from Flomerics ...
• Flomerics: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
