Product category:
Plant Design and Construction
News Release from: Flomerics | Subject: Flomerics EFD.Lab
Edited by the Processingtalk Editorial
Team on 09 January 2008
Simulation reduces extractor hood design
time
Marenco AG used the Flomerics EFD.Lab engineering fluid dynamics software to halve the design time for a new extractor hood, specified by one of their clients
The combined design and analysis time required only half the time it would have required in comparison to traditional engineering methods Placed over a cooking range, extractor hoods remove grease, smoke and odours from the kitchen
This article was originally published on Processingtalk on 16 Nov 2007 at 8.00am (UK)
Related stories
Saipem UK selects EFD.Lab Fluid Dynamics Software
Saipem UK has selected the Flomerics EFD.Lab engineering fluid dynamics software for the analyses of transportation barges, construction and drilling vessels, and deck structures
Optimising sail design using 3D simulation
Finnish sail maker WB-Sails is using EFD.Lab fluid dynamics simulation software from Flomerics to develop and optimise sails for Star and Finn class Olympic sailboats
They rely on a combination of a fan and a filtration system to extract and/or clean the air.
The new extractor hood designed by Marenco is not only more efficient but also operates at a lower decibel-level than others.
In consumer environments, a premium is placed on these extractor hoods as they create less noise.
Further reading
Flow simulation helps solve LED overheating
Voxdale, a Belgium based engineering consulting firm, used the Flomerics EFD.Pro CFD software to solve a power light emitting diode (LED) thermal management problem, in just one day
EFD.Pro in heat exchanger engineering design
Bronswerk Heat Transfer, a leading manufacturer of heat exchangers and fans, has expanded their use of Flomerics EFD.Pro from strictly research and development to everyday engineering design
The latest meshing techniques for flow simulation
Flomerics, a world-leading developer of engineering simulation software, has published a comprehensive technical white paper on mesh generation techniques for fluid flow simulation
"Using EFD.Lab enabled us to develop this new product in record time and significantly reduced the number of physical prototypes we needed to test," said Hans-Peter Keel, mechanical design engineer at Marenco: "Because our team was able to develop this model so quickly our customer was able to take their product to market much faster than their competitors".
The new extractor hood was introduced to the consumer market in August 2007.
Since 1997 Marenco has been offering innovative engineering and consulting services to companies such as Hilti, Roche and Bosch within the automotive, aerospace and industrial equipment industries.
As a design specialist, Marenco relies on a combination of UG NX for solid modeling and EFD.Lab for computational fluid dynamics analysis.
"We originally invested in EFD.Lab for a specific project.
We found that it offered the same functionality as CFX or Fluent and was also much more affordable.
Since then we have used EFD.Lab for many other applications," added Keel.
EFD.Lab proved especially helpful in their latest project as it is extremely difficult to see inside the exhaust enclosure and how the various components interact with one another.
"When you have airspeed over 9 meters per second you get a fair amount of noise.
EFD.Lab helped us find the point where the noise originated so we were able to modify our design to reduce noise".
Also, extractor hoods rely on a filtration system to remove smoke and fat particles from the air.
"This air needs to be taken out of the room but you don't want it to pollute the extractor hood or any of the other components during the extraction process.
Through simulation we predicted the most impacted area of the filter and the best geometry for the porous filter material.
The simulation also helped us predict the rate at which filters would clog in normal use, and hence to inform our client that to maintain effective filtration, filters need to be cleaned every 2-3 years.
The entire design, simulation and physical testing process took half the length of time it would have taken using traditional design processes.
We always test all designs by building a physical prototype and comparing it with the simulation results but simulation helped us reduce the number of physical prototypes drastically as we were able to get reliable performance information very quickly.
With EFD.Lab, I can do what I need to do faster and better by locating the critical problem areas quickly.
It can be very difficult to investigate problems on a physical prototype but with EFD you can put your finger right on the problem and fix it immediately".
Interested readers may watch a free EFD.Lab online demo via the website. Request a free brochure from Flomerics ...
• Flomerics: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
