Product category:
Hydraulics and Pneumatics
News Release from: Flo-tech | Subject: Flo-tech PFM6 Flo-check
Edited by the Processingtalk Editorial
Team on 04 October 2006
Fast hydraulic testers offer simple
operation
Flo-tech portable hydraulic testers make all flow, pressure and temperature measurements simultaneously, for fast diagnostic troubleshooting of all types of mobile or stationary hydraulic systems
Designed for fast diagnostic troubleshooting of all types of mobile or stationary hydraulic systems and components, the Flo-tech portable hydraulic testers make all flow, pressure and temperature measurements simultaneously from one point The testers are compact, durable and self-contained with laboratory accuracy
This article was originally published on Processingtalk on 11 Nov 2004 at 8.00am (UK)
Related stories
Controller brings flexibility in motor protection
The new ABB Universal Motor Controller, UMC22, offers a powerful and flexible intelligent control device for motor protection applications, and is designed for use with the new ABB Fieldbus Plug
Robot programming time reduced from weeks to days
ABB, the global power and automation technologies group, introduces TeachSaver, a new software product that can dramatically reduce robot-programming time from weeks to days - or even hours
The Flo-tech PFM6 Flo-check Digital Hydraulic Test Unit has a full-range accuracy of +/-1% with a turbine flow sensor that gives fast response.
It features a large 3.5 digit LCD for both flow and temperature, a platinum resistance thermometer and a swept wet well that is fast and accurate.
The simple one toggle switch controls power, flow and temperature.
The load valve offers fingertip control of pressure to 6000psi/414bar.
Another Flo-tech model, the PFM6BD, has the same features as the PFM6, but provides in-line testing of servo systems, valves and bi-directional motors.
The PFM8 tester and dynamometer has a front panel for US or metric readings and a large, easy-to-use membrane switch that selects flow, temperature, pressure and power.
It reads digital pressure to 6000psi/414bar and the dynamometer reads HP and kW directly.
The low noise input circuitry provides steadier readings when flow is pulsating or cavitating.
An auto/off automatically turns power off after 5 minutes with no flow signal.
This model also has the same features as the PFM6.
Flo-tech products are specially designed for field service, production testing, industrial processing and many other applications requiring dependable, accurate measurements at a reasonable cost.
• Flo-tech: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
