Product category:
Waste-water handling, monitors + treatment
News Release from: Flowline | Subject: Flo-Dar
Edited by the Processingtalk Editorial
Team on 12 October 2007
A new approach to open-channel
flow-monitoring
The Flo-Dar range of flowmeters provide a revolutionary approach to open-channel flow monitoring by combining digital Doppler radar velocity sensing with ultrasonic pulse echo level sensing
As a result, Flo-Dar systems are extremely effective in applications which require maintenance-free open channel flows to be remotely measured Available through flowmeter specialists Flowline, the Flo-Dar device is the ideal solution for monitoring difficult flow conditions
This article was originally published on Processingtalk on 10 Jul 2008 at 8.00am (UK)
Related stories
Flowmeters for real time flow control
The latest addition to the established range of Flo-Dar open channel flow meters is an ATEX certified portable system with a built-in GPRS internet data transfer facility
Open channel flowmeter can measure 5m/s!!
The latest version of Flo-dar, the radar-based open-channel flow meter technology from Marsh Mcbirney Inc, has software with the capability accurately to measure flows up to 5 metres per second
For example, flows which have a high solids content, are high temperature, include caustic media, are high velocity, or involve either shallow or large man-made channels such as large sewers.
The key benefits of these flowmeters are that they are highly accurate, easy to install and operators have no contact with the flow during installation.
Also, the maintenance problems associated with other flow measurement technologies which depend on sensors being submerged in the flow, such as sensor fouling, are eliminated.
They do not require on-site calibration and the interchangeable sensors and monitors can be replaced in the field.
The principle behind Flo-Dar flowmeters is that they transmit a digital radar beam that interacts with the fluid and reflects back signals at a different frequency from that which was transmitted.
These reflected signals are compared with the transmitted frequency and the resulting frequency 'shift' provides an accurate measure of the velocity and the direction of the flow.
The level is detected by ultrasonic pulse echo and the flow is then calculated based upon the Continuity Equation: Q = V x A, Where Q = Flow, V = Average Velocity and A = Area.
Typical applications for Flo-Dar radar flowmeters include general process and industrial flow measurement applications, municipal, water and waste treatment sites or wherever highly accurate, open channel flow measurement is needed, regardless of difficult conditions. Request a free brochure from Flowline ...
• Flowline: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
