Real time bulk density measurement at ACHEMA 2006

At ACHEMA 2006 in Frankfurt, Freeman Technology will demonstrate a new capability for the FT4 Powder Rheometer - 'real time' bulk density measurement

At ACHEMA 2006 Freeman Technology will demonstrate a new capability for the FT4 Powder Rheometer - 'real time' bulk density measurement.

New software developments for the FT4 now make it possible to measure bulk density during the course of a test programme.

No additional hardware or instrumentation is needed.

Subtle changes in bulk density that occur during repeat testing as the sample stabilises are monitored precisely.

This variable can now be measured easily as a function of, for example, degree of aeration or air flow rate.

These new software elements are easily incorporated into an existing user's test programme making this a valuable extension to the FT4 capability.

For new users, bulk density measurement will be provided as an integral part of the software package delivered with the instrument.

As with all other FT4 test programmes, bulk density measurement is fully automated.

Because the FT4 methodology is based on repeatable conditioning and consolidation processes it can be used to generate highly accurate and reproducible bulk density measurements.

Dynamic studies of bulk density, under different test conditions, afford additional insight into powder behaviour and give processors more information about this critical parameter.

Changes in bulk density resulting from consolidation, which have been widely linked with powder flowability, and from aeration, are expected to be of particular interest.

ACHEMA 2006 is from 15-19 May 2006 in Frankfurt, Germany: visit Freeman in Hall 5.1, Stand No F38.

Back to top