Product category:
Power supplies and plant cabling
News Release from: Harting | Subject: Han DD
Edited by the Processingtalk Editorial
Team on 17 June 2005
New connector inserts meet IEC 61984
standard
The new generation Han DD industrial connector inserts meet the requirements of the IEC 61984/DIN EN 61984 standard, with the new obligatory creepage and clearance distances
The new generation Han DD industrial connector inserts from Harting have been specifically designed to meet the new requirements of the IEC 61984/DIN EN 61984 standard, which makes new creepage and clearance distances, obligatory since October 2004 The new inserts meet the new requirements while offering a working current of 10 A at a working voltage of 250 V, plus an impulse rated voltage of 4 kV at pollution degree 3
This article was originally published on Processingtalk on 7 Feb 2005 at 8.00am (UK)
Related stories
High-density connector module
The new Han DDD-module from HARTING accommodates 17 Han-D connector inserts with crimp termination, allowing the user to achieve a 40% increase in contact density compared to earlier designs
They also meet the V0 flammability requirement of UL 94 through the use of polycarbonate material.
Other key parameters include a maximum rated voltage (according to UL/CSA requirements) of 600 V, insulation resistance of 0.1 MMohm minimum, an operating temperature range of -40C to +125C, and a mechanical working life of more than 500 cycles.
The new generation of Han DD inserts is 100% mateable with earlier versions, so users will have no compatibility problems in using them alongside existing products.
• Harting: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
