Product category:
Hydraulics and Pneumatics
News Release from: Hydraulic System Products | Subject: Model HSP2810 / 18
Edited by the Processingtalk Editorial
Team on 11 July 2006
Needle type flow control valves
These flow control valves are additions to the range of hydraulic valves manufactured by Hydraulic System Products of Wakefield, West Yorkshire
These flow control valves are additions to the range of hydraulic valves manufactured by Hydraulic System Products of Wakefield, West Yorkshire They are installed in hydraulic system pressure lines to provide infinitely variable flow control
This article was originally published on Processingtalk on 17 Jul 2006 at 8.00am (UK)
Related stories
New pressure switches catalogue
A new catalogue bringing together their expanding range of pressure and vacuum operated switches has been published by Hydraulic System Products of Wakefield in West Yorkshire, UK
A new pressure switches catalogue
A new catalogue bringing together their expanding range of pressure and vacuum operated switches has been published by Hydraulic System Products
Two versions are manufactured: Model HSP2810 allows infinitely variable controlled flow in either or both directions.
Model HSP2818 has an integral check valve to allow infinitely variable controlled flow in one direction and free flow in the opposite direction.
In both models the flow rate is varied by a tapered valve which passes through a fixed orifice.
A threaded stem with a hand wheel controls the height of the valve and a locknut is provided on the threaded stem to lock the flow setting.
The valves are designed for in-line mounting and each model is available in four sizes having port connections of 1/4'', 3/8'',1/2'' and 3/4'' NPTF or BSPF.
The largest sizes offer variable controlled flows up to 80 l/min.
The check valve in Model HSP2818 has a cracking pressure of 0.20 bar and permits free flow up to 110 l/min for the largest size.
Maximum operating pressure is 350 bar for all valves.
The steel bodies are zinc plated and passivated for maximum protection against environmental conditions and the stem is stainless steel with Viton seals.
Overall height with the stem fully open is 104mm for the largest sizes of both models.
Lengths port to port for the largest sizes are 72mm and 90mm for models HSP2810 and HSP2818 respectively.
Typical applications would include limiting the maximum speed of a cylinder movement in either meter-in and/or meter-out circuits or in a test rig to apply infinitely variable and progressive back pressure on the test piece.
• Hydraulic System Products: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
