Perfect ATEX level system for chemical application

A comprehensive multi-point ATEX certified level measuring and alarm system, supplied and installed by Hycontrol, is playing an important role at leading building product manufacturer Tremco illbruck

The multi-technology level measuring installation provides important upgraded level measurement and safety capabilities for 15 vertical and horizontal tanks containing a wide range of difficult-to-measure raw materials, including solvents, emulsions and polymers at the company plant in Wigan.

Tremco illbruck, created from the merger of Tremco European Sealant/Weatherproofing Division with illbruck Sealant Systems in September 2005, is a leading manufacturer of sealants, glazing, waterproofing, roofing, flooring and passive fire protection products.

Given the diverse range of finished products and raw materials, accurate level measuring is vital for both stock control and to comply with stringent health and safety issues for employees and suppliers.

When looking to improve their existing level systems, Tremco engineers recognised that given the range of sticky, volatile and potentially hazardous vessel contents, finding suitable equipment to operate under all these demanding and varying conditions would not be easy.

However, following a site visit and discussions with Tremco, extreme level measuring specialists Hycontrol came up with a comprehensive solution that met all their criteria.

The extensive Hycontrol experience in the chemical industry ensures clients receive the best engineered solution for their application, offering a combination of high accuracy and maximum safety, without compromise.

They recognise the importance of dual redundancy measurement in such installations and have developed integrated safety critical level measuring systems for a wide range of applications.

Nine of the vessels, installed in three of the Tremco tank farms, are all fitted with intrinsically safe versions of the Hycontrol VF7 series TDR radar units.

Installed in tandem with these are ATEX certified probes and switches to provide independent 'belt and braces' high level alarm security.

The seven solvent tanks are fitted with explosion proof HYCTF-TD vibrating probe switches, whilst the two bitumen tanks are fitted with MD20 RF admittance switches.

The different measuring technologies were carefully selected to ensure measurement accuracy and safety could not be compromised in any way by the effects of vapour interfaces, temperature changes, pressure fluctuations or build up of sticky materials on the probes.

The versatile TDR level gauges are ideal for such retrofit applications and can be fitted inside tanks via very small apertures (typically 1" BSP) and usually without structural modifications.

The TDR transmitter sends low-power electromagnetic pulses along the instrument probe.

Upon reaching the surface of the vessel contents, the pulses are reflected back and the instrument measures the time between the emission and the reception of the signal, converting this into a pre-calibrated 4-20mA output current proportional to the level in the vessel.

Any weak or spurious signals are analysed and ignored by the electronics.

The TDR units, which have a proven track record measuring difficult products such as adhesives, volatile solvents, bitumen and sticky polymers, provide an unrivalled accuracy of better than +/-3 mm over the 10metre measuring range, ensuring precise stock control.

Any inevitable steady build of product on the stainless steel probe has no adverse operational effects, thereby maintaining safety integrity.

The tuning fork principle of TF-TD vibrating probes will operate with virtually any liquid product and these versatile devices require no set-up or calibration whatsoever.

This makes them ideal for use with difficult and hazardous volatile solvents.

They are available with a wide range of flanged or screwed process connections and can have extensions, enabling probes to reach three metres into a tank if required.

The wetted parts of standard switches are 316 stainless steel, whilst special Halar coated and Hastelloy switches are available for extremely corrosive applications.

The switch has a visual indication showing its on/off status and a test point on the side of the housing to allow easy checking of switch functionality.

The remaining six tanks on site are fitted with the Hycontrol Microflex C advanced ultrasonic level measuring units, four of which are Microflex CIS intrinsically safe ATEX versions.

These two-wire level transmitters minimise on site cabling and can be calibrated either at the unit or remotely via HART, making set-up and service very straightforward.

The proven ultrasonic non-contact technology, together with proprietary false echo software, provides stable and reliable high accuracy level data.

High level alarm signals for the six tanks are again provided by intrinsically safe vibrating probes and admittance switches.

All of the level measuring gauges and switches link into bespoke alarm or display panels, designed and assembled in-house at Hycontrol.

These panels are purpose built for each application, taking into account the number of points being monitored and where they are to be installed.

If this in within a designated ATEX zoned area, integral 'power limitation barriers' are fitted between the measuring instruments and panel.

Where applicable, panels are fitted with flashing beacons and sirens to warn of any potentially dangerous high level excursions during filling as well as warning of low content levels.

Hycontrol sales director Nigel Allen is clear about the role his company has to play in such difficult applications and as he explains: "This installation clearly demonstrates our broad capabilities in safety critical level measuring systems.

This allows us to provide the best engineering solution for any application, without compromising safety or accuracy.

We have extensive experience in extreme level measuring applications, especially involving products such as hot bitumen and hazardous solvents, where dual measuring capabilities are essential.

In addition to our level measuring expertise, we offer a versatile panel design and build service.

This sets us apart from many of our competitors and ensures our customers receive fully integrated and tested systems that meet their exact requirements".

At Tremco Jacqui Lowe is delighted with the overall system and as she concludes: "We were initially concerned that, given the complexities of our level measuring and safety requirements, we would not find an integrated single source solution.

However, Hycontrol were able to demonstrate their capabilities in each part of the plant and the resulting systems ensure optimum safety for personnel and the environment.

In parallel the improved inventory visibility from the level data means we can now minimise our stock holding, whilst still ensuring we don't run out of crucial raw materials".

The current installation provides local level data and alarms at each silo.

However the flexibility of the Hycontrol system means that it can readily be upgraded so that data from all the vessels can viewed on a central PC, with the further capabilities of remote web access.

Back to top