Product category:
Liquid Analysis: Viscosity, Density
News Release from: Hydramotion | Subject: XL7-15x
Edited by the Processingtalk Editorial
Team on 12 February 2007
Process viscometer approved in all
hazardous areas
Hydramotion intrinsically safe XL7-15x series process viscometers are now certified to ATEX Ex II 1GD for use in hazardous atmospheres where combustible dust as well as explosive gas may be present
Hydramotion is pleased to announce an important extension to the certification of its Intrinsically Safe XL7-15x series process viscometers The instruments are now available certified to ATEX Ex II 1GD for use in hazardous atmospheres where combustible dust as well as explosive gas may be present
This article was originally published on Processingtalk on 12 Feb 2003 at 8.00am (UK)
Related stories
Fluid viscosity measurement comes online
Once a mainstay of laboratory analysis, fluid viscosity measurement has now been brought on-line in the shape of XL Series Process Viscometers from Hydramotion
Portable viscosity measurement on the spot
The Viscolite 700 from Hydramotion gives instant spot measurement of viscosity in the field, factory or lab without requiring any on-site set-up or calibration
The extension certifies that the XL7 is fully compliant with IEC standards 61241-0:2004 (Dust General Requirements) and IEC 61241-11:2005 (protection by intrinsic safety "iD") and meets all the relevant Essential Health and Safety Requirements in Annex II of the ATEX Directive 94/9/EC.
The new certification widens still further the range of applications for the XL7-15x series, which is already certified for use in Zone 0 Hazardous Areas (presence of explosive gas), equivalent to Class 1, Div 1, Group A in North America.
The use of intrinsically safe instruments has become ever more important with the introduction of the UK Dangerous Substances and Explosive Atmospheres Regulations (DSEAR).
Typical applications for the intrinsically safe XL7 range include the measurement of petroleum products, polymers, resins or solvent-based lacquers and varnishes.
With the extended certification, XL7 viscometers can also be used in applications such as the measurement of coal/oil slurries, where finely-divided coal dust presents a significant combustion hazard.
Another possibility is pharmaceutical production, which can involve a mixture of combustible dusts and solvents that are easily ignited by static discharge.
Ideal for these and many other applications, the XL7 is a field-hardened, rugged instrument that can be used in any fluid under any process conditions.
The standard sensor is an all-welded 316 stainless steel construction which may be mounted in any orientation in any tank or pipe, no matter what size.
The digital readout unit can be mounted up to 3000 metres from the transducer, and Hydramotion will supply a suitable IS barrier on request.
As the XL7 viscometer has no moving parts, seals or bearings that could wear out or fail in service, it needs virtually no maintenance and no on-site recalibration.
With very high sensitivity and excellent repeatability, the XL7 must be the instrument of choice for process viscometry, no matter how harsh or hazardous the measurement conditions may be. Request a free brochure from Hydramotion ...
• Hydramotion: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
