Product category:
Bearings, lubrication, oil and filters
News Release from: Schaeffler (UK)
Edited by the Processingtalk Editorial
Team on 13 February 2007
Wales becomes production location of
choice
After introducing a three-year culture change programme to its manufacturing plant in Llanelli, Schaeffler (UK) has now averted the threat of production being transferred to Eastern Europe
After introducing a three-year culture change programme to its manufacturing plant in Llanelli, Schaeffler (UK) has now averted the threat of production being transferred to Eastern Europe Three years ago, like many UK-based manufacturers, the Schaeffler UK plant in Llanelli, South Wales, was under extreme pressure from lower labour cost countries
This article was originally published on Processingtalk on 15 Aug 2008 at 8.00am (UK)
Related stories
Precision bearings keep hydraulic systems running
Hydraulic drives and pumps require precision bearings and seals that are reliable, efficient and able to withstand the most demanding operating conditions, says Dr Steve Lacey of Schaeffler UK
Hand-held condition monitoring system improved
The latest Schaeffler handheld vibration monitoring and balancing device, FAG Detector III, makes condition monitoring easier and more accessible for engineers of all skill levels
Production was about to be transferred to Eastern Europe, which would result in inevitable job losses at the Welsh plant.
However, with the help and commitment of his workforce, plant director at Llanelli Roger Evans had other ideas.
"When it came to enthusing and motivating the employees here at the plant, the philosophy I adopted was that the rate of learning should be greater than the rate of change," explains Evans: "Back in 2001, the management team at the plant recognised that in order to survive in the long term, new products had to be attracted into the plant.
Further reading
Monorail guidance systems reference guide
Schaeffler UK has published a free reference guide to its range of monorail guidance systems and accessories, including linear recirculating roller bearing and ball bearing type guideway assemblies
Autobalancer improves angle grinder safety
The Schaeffler Autobalancer improves safety on angle grinders by cutting vibration by more than 50%, improving operator handling and safety, whilst reducing grinding disc wear
Bearings for high load / low speed applications
The JK0S range of integral tapered roller bearings are ideally suited to applications in which loads are very high but speeds comparatively low, such as pulleys, crane wheels and cable rollers
So we embarked on a three-year culture change programme, to try to reach our vision of becoming the production location of choice, both within the Schaeffler Group and with customers".
The programme started with a management strategy workshop, which identified the vision and also determined the inherent company values that had to be adopted by all our employees in their day-to-day activities, namely integrity, innovation, respect, commitment and passion.
"We then set about interviewing every member of the workforce individually to explain the plant vision, and to get the employees' feedback on this," says Evans: "We realised from the interviews that our employees didn't possess the required skills, knowledge and expertise to achieve the vision.
So we increased our investment in training in order to raise overall skill levels at the plant and to foster an environment of life-long learning and continuous improvement".
In order to put the strategy into place, new processes and procedures were required.
A 'Single Thread' concept was established, which identified the enablers (customers, suppliers, processes, employees and costs) and the targets (meaningful KPIs) at a company, departmental and team level.
But the key enabler here, explains Evans, "were the people themselves, who would make the difference as to whether the plant survived the next few years".
And survive the plant did.
Since the culture change programme was introduced in 2001, the plant has seen some formidable improvements.
Around 89% of operators have now achieved NVQ Level II in Performing Manufacturing Operations - the aim is to reach 100%.
Many operators have also requested to proceed to NVQ Level III.
And all employees at the plant have now undergone training in 5S Workplace Organisation Training.
"Employee morale is high and demand for learning is greater now than it has ever been," says Evans: "Team working, cooperation and communication have all improved, as has the trust between management and the workforce".
A learning questionnaire carried out recently at the plant had a high response rate and revealed that the workforce had a very positive attitude towards learning and development.
91% said they believed it was necessary to learn new skills and 95% said it was their duty to contribute towards problem solving.
The launch of the company-wide 5S programme has also contributed to the success of the plant.
Improvements in housekeeping and workplace organisation have been made, as well as improvements in a range of key performance indicators.
First, scrap levels have been reduced from 2.92% to less than 1%; accidents have been reduced by 60%; absenteeism has dropped from 6.2% to 3.6%; and defects have been reduced by more than 90%.
Added value per employee, another key measure at the plant, has also improved dramatically.
"We've also implemented Six Sigma and Kaizen projects, which resulted in substantial cost savings of around 500,000 euros," says Evans: "But the real difference has been the workforce, who now show a greater willingness to learn and to take responsibility for their own development.
More than 100 employees, for example, have voluntarily enrolled on our 'Learn Direct' courses and the use of our new Learning Centre".
But not everything went smoothly and some considerable barriers had to be overcome to reach the plant vision.
As Evans explains: "Time and resources have been a major difficulty during the programme.
Manufacturing output has had to be maintained to satisfy our customers.
It has been a continuous balancing act to keep the initiative on track and to maintain production.
The support and buy-in of all senior managers from the outset was critical.
However, rather than a downturn in productivity, the benefits of continuous improvement are being realised and productivity has increased considerably".
Another difficulty was actually enthusing the workforce to learn.
The factory is located in an area of Wales with some of the lowest levels of adult literacy, with many employees not having been in a formal learning environment since they left school, with no formal qualifications.
"We realised it may be difficult to enthuse these people to enter into learning initiatives.
So the one-to-one interviews were very important," advises Evans.
The support of management in encouraging learning, says Evans, along with the support of the local college, Coleg Sir Gar, particularly in the area of basic skills, were critical success factors.
Even the CBI has recognised the recent achievements at the Llanelli plant, by awarding the company the Human Capital Award for 'Education, Skills and Leadership' 2006.
Schaeffler UK beat the likes of McDonalds, ARM, Baxi Heating UK and the Serco Group to win the award for its outstanding achievements in education, leadership development and skills-based initiatives.
Roger Evans received the award on behalf of the plant at the awards ceremony on 19th October this year at the London Hilton Park Lane.
The culture change programme at Llanelli is an on-going project of course, but the success it has already brought to the plant will continue to be felt for many years to come. Request free introductory details about products from Schaeffler (UK) ...
• Schaeffler (UK): contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
