Product category:
Bearings, lubrication, oil and filters
News Release from: Schaeffler (UK) | Subject: FAG Motion Guard Champion
Edited by the Processingtalk Editorial
Team on 21 January 2008
Automatic lubricators save E45k at
coating company
By installing automatic lubrication systems on its electroplating robots, a coatings company has saved around 45,000 euros over the last three years, by eliminating plant downtime
Applied coatings specialist Collini Wien of Austria is making savings of around 15,000 euros per year after installing FAG Motion Guard Champion automatic lubricators from FAG Industrial Services (F'IS), the condition monitoring and maintenance management organisation within the Schaeffler Group The electroplating plant at Collini Wien has been in operation with the automatic lubricators on selected linear bearings and guideways for more than three years, without having had any disruption caused by insufficient lubrication
This article was originally published on Processingtalk on 15 Aug 2008 at 8.00am (UK)
Related stories
Precision bearings keep hydraulic systems running
Hydraulic drives and pumps require precision bearings and seals that are reliable, efficient and able to withstand the most demanding operating conditions, says Dr Steve Lacey of Schaeffler UK
Hand-held condition monitoring system improved
The latest Schaeffler handheld vibration monitoring and balancing device, FAG Detector III, makes condition monitoring easier and more accessible for engineers of all skill levels
The savings come from eliminating the cost of replacement parts, production downtime and labour associated with an annual plant shutdown.
Headquartered in Hohenems, Austria, Collini Wien specialises in finishing the surfaces of base materials by applying special coatings to them.
These coatings protect the parts from corrosion and improve the aesthetics of the material.
Further reading
Monorail guidance systems reference guide
Schaeffler UK has published a free reference guide to its range of monorail guidance systems and accessories, including linear recirculating roller bearing and ball bearing type guideway assemblies
Autobalancer improves angle grinder safety
The Schaeffler Autobalancer improves safety on angle grinders by cutting vibration by more than 50%, improving operator handling and safety, whilst reducing grinding disc wear
Bearings for high load / low speed applications
The JK0S range of integral tapered roller bearings are ideally suited to applications in which loads are very high but speeds comparatively low, such as pulleys, crane wheels and cable rollers
The company employs around 900 staff across ten production sites.
Before installing the 'FAG Motion Guard Champion' lubricators from F'IS, Collini Wien frequently had to shut down its electroplating plant because of damage to bearings caused by insufficient lubrication.
For example, worn linear bearing units and guideways on its electroplating handling robots had to be replaced every 12 months due to wear.
This resulted in the complete plant having to be shut down for between three and seven days at a time.
The company therefore wanted to simplify its re-lubrication process and prevent any disruptions caused by insufficient lubrication.
The handling robots are 6-axis Kuka robots with a repeatability accuracy of +/-0.3mm and a rated payload of 200kg.
Arm length is 1,000mm and the robots use INA linear ball bearing units and 6-metre long guideways, both supplied by the Schaeffler Group.
In such a precise system, lubrication of bearing units is critical.
Experts from F'IS installed multiple FAG Motion Guard Champion lubricators - filled with FAG Arcanol Multitop grease - on the linear bearing units.
Each lubricator now ensures that bearings and shafts are continuously supplied with exactly the correct volume of lubricating grease, increasing the service and maintenance intervals of the bearings significantly.
FAG Motion Guard Champion is a robust, electro-mechanically driven unit that operates on replaceable batteries.
The device is electronically controlled and has a back-geared motor that enables the unit to discharge lubricant at adjustable intervals of one, three, six or 12 months.
A lubricant canister is screwed to the drive unit, holding 60, 120 or 250cm3 of lubricating grease.
Automatic pressure control at 5bar is provided and the unit operates in temperatures from -10C up to 50C.
The device is also protected against dust and splash water and is immune to electromagnetic interference from surrounding equipment.
By using Motion Guard Select Manager software, the user can select the discharge interval for the application, determine replenishment quantities and select preferred lubricating greases.
FAG Motion Guard Champion and Compact lubricators can be used on all types of plant, including pumps, compressors, fans, conveyors and vehicles.
For more information on F'IS products and services, please visit the website, telephone the marketing department, or use the Processingtalk Reader Response Service. Request a free brochure from Schaeffler (UK) ...
• Schaeffler (UK): contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
