Product category:
Process Control hardware
News Release from: In2Connect
Edited by the Processingtalk Editorial
Team on 03 February 2004
Cables to special process engineering
requirements
Calmont are an ISO 9001 registered manufacturer providing unique cable solutions for critical applications: from simple hook-up wire to complex, multiway wires and cables to customer specifications
In2Connect now represent Calmont Wire and Cable of the USA Founded in 1958, Calmont are an ISO 9001 Registered manufacturer providing unique technical solutions for critical applications: from simple hook-up wire to complex, multiway wires and cables to customer, UL or MIL specifications
This article was originally published on Processingtalk on 4 Feb 2005 at 8.00am (UK)
Related stories
In2Connect and high temperature cables
In2Connect and Thermal Wire has the experience to solve your toughest, extreme temperature, wire and cable problems, from -100 to +1000C
New range of cables to international requirements
In2Connect is helping to alleviate UK cable supply problems by introducing for the first time to engineers, OEM buyers and distributors the extensive products range of GCE Cavi Elettrici
Working with PVC, Polyethylenes, Silicones, ME Fluorocarbons, Polyurethane, TPE, etc, Calmont performance is unrivalled for applications that require high reliability, small diameter, low noise, chemical resistance or maximum flex life.
Some typical demands have been.
Medical reusable and disposable cables including optics, lumens, drain tubes for catheters, diagnostic imaging, endoscopy, laparoscopy, medical robotics, etc Military spacecraft to satellites, aircraft, missiles, tactical comms and shipboard or subsea uses.
High Flex Industrial and Robotics: robotic machine control, sensors, test and measurement, low noise EMI resistant, HV test probes.
High Temperature: silver or nickel plated conductors, etc with Tefzel, Teflon PFA and FEP, Silicon rubber and other specialist polymers.
Calmont can help from start-up through to full scale production/stock quantities.
The Calmont Rapid Prototyping Service offers your concept, whether simple or complex, turned into a prototype and delivered within 2 to 3 weeks! Prototypes are not just limited to a traditional wire or cable.
If the design of your product lends itself to the same standard manufacturing processes, such as extrusion, cabling or braiding, the opportunities are limitless.
Typical length produced under this program is 200 to 600 feet, so ask us for a quotation!.
• In2Connect: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
