Digital clinometers with integral data logging

Inertial Aerosystems announce the availability of a new range of single and dual axis Digital Clinometers offering RS232/RS485 serial and analogue outputs of tilt and temperature

Inertial Aerosystems announce the availability of a new range of single and dual axis Digital Clinometers offering RS232/RS485 serial and analogue outputs of tilt and temperature.

The serial data is easily interfaced to GPS receivers, spread spectrum radios and wireless Ethernet converters.

The internal sensor is a liquid filled electrolytic transducer with no moving parts.

The five models in this range have a choice of single or dual axis, an angular range of +/- 3 to +/- 50 degrees with best resolution of 0.0001degrees with a linearity of 0.1% of full span.

An on-board facility is included which allows data logging via non volatile memory and comes with graphic display software.

It is able to store up to 319 readings with a powerful command set to collect, process and store data or transmit to an external host.

RS232 models have the option of a tilt switch output to operate alarms, programmable controllers etc.

Able to operate over a temperature range of -40 to +85C, all the range have tough die cast IP65 enclosures measuring 120 x 80 x 60mm and weighing 550gm.

These versatile products are used for example in antenna positioning, surface and subsea marine applications, structural and geotechnical monitoring, processing movements, monitoring industrial vessels, conveyor belts, tipper trucks and scientific research.

Back to top