Product category:
Condition monitoring and vibration analysis
News Release from: Inter Elektrik Elektronik | Subject: Detective Multimeter PM-DMCM
Edited by the Processingtalk Editorial
Team on 09 August 2005
Detective Multimeter warns of failures
The Detective Multimeter is a new fault monitoring device for detecting impending mechanical and electrical failures in three phase motors and motor-driven equipment at an early stage
The Detective Multimeter, a fault detecting device for detecting unforeseen faults at an early stage, in three phase motor and motor-driven equipment The Detective Multimeter (PM-DMCM) is a microprocessor based controller which monitors and measures the frequency of line current and voltage values of three phase systems
This article was originally published on Processingtalk on 19 Feb 2003 at 8.00am (UK)
Related stories
Oven temperature controllers
ABB Automation Technologies has supplied 12 ControlIT C351 single loop process controllers to Belgian chemical company Tessenderlo Chemie NV, to control six ovens in a continuous sulphate process
State of the art micro-processing technology built into the Detective Multimeter (PM-DMCM) is designed to sense, detect and inform of impending mechanical and electrical failures in three phase motors and motor run operating systems at the early stages of fault occurrence, while its panel multimeter function enables three phase current readings, and phase to phase voltage and frequency readings.
Some of the electrical and mechanical breakdowns/faults that PM-DMCM can determine/detect are as follows.
a) Ball Bearing Problems.
b) Misaligment Errors.
c) Unbalanced Load.
d) Rotor and Stator Faults.
e) Unbalanced power.
f) Pump,compressor, gear box, fan problems.
For more detailed information on our products and about our company please visit our web site.
• Inter Elektrik Elektronik: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
