Product category:
Metering pumps and dosing systems
News Release from: Integrated Dispensing Systems | Subject: V300
Edited by the Processingtalk Editorial
Team on 01 September 2005
New V300 Stroke Rate Controller for
fluid metering
Fluid Metering introduces the new V300 Stroke Rate Controller for precision control of all FMI V-Series Variable Speed Metering Pumps in labs, R and D pilot plants, process and production applications
Fluid Metering introduces the new V300 Stroke Rate Controller for precision control of all FMI V-Series Variable Speed Metering Pumps The V300 is designed for accurate fluid metering in laboratory, R and D, test stands, pilot plants, process, and production applications
This article was originally published on Processingtalk on 9 Mar 2006 at 8.00am (UK)
Related stories
Precision flow control for variable speed pumps
The new V300 features membrane switches to enable operator adjustment of flow rate settings and start/stop functions helped by its large and clear 3 digit LCD flow display
Proportional fluid metering has electronic control
Ratio:Matic dual head metering pumps can now proportionally meter and electronically vary the flow rate of two fluids at ratios from 1:1 up to 1000:1 at flow rates from 20 microL/min up to 4L/min
Front panel membrane switches offer convenient manual setting of pump stroke rates adjustable in 0.1% increments.
Stroke rate can also be controlled electronically through an interface which can accept 4-20mA, 0-5 VDC, and 0-10 VDC input signals typically provided by process sensors and instrumentation.
A 3.5 digit LCD readout displays either the percentage of flow rate in the manual position or the actual percentage of selected input signal when controlled electronically.
The V-300 is capable of variable control of fluid flow from 0 up to 4 L/min in both forward and reverse directions.
In addition, membrane switches can start and stop the pump without the need for re-adjustment of stroke rate settings.
The V300 operates on 100-240V 50/60 Hz and is CSA, CSA-US, and CE rated.
The unit is compatible with the RHV, QV, QVG, and Q2V Ratio:Matic pump models providing flow ranges from 0 to 4 L/min (60 gal/hr) at pressures up to 100 psig (6.9 bar).
When used with the Q2V Ratio:Matic Dual Pump Drive, exceptional proportional metering of two fluids, up to 500:1 ratio, can be accomplished.
The V300 electronics are housed in a rugged anodised enclosure ideal for both bench top and wall mounting in laboratory, process and production environments.
• Integrated Dispensing Systems: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
