Product category:
Environmental sensors and sampling systems
News Release from: Jiskoot | Subject: Condensate Sampling System
Edited by the Processingtalk Editorial
Team on 02 October 2003
Condensate sampler mixer for
representative grabs
A Condensate Sampling System designed for SLP to establish the composition of pipeline contents on the Clipper Platform uses a static mixer immediately upstream of the sample pumps, for accuracy
A Jiskoot Condensate Sampling System designed for SLP to establish the composition of pipeline contents on the Clipper Platform uses a static mixer immediately upstream of the sample pumps, ensuring suitable mixing at the extraction points to make the samples representative of the whole pipeline cross-section when the grab is taken The system extracts, isolates and stores multiple single cc samples of condensate from the process pipeline
This article was originally published on Processingtalk on 30 Jul 2008 at 8.00am (UK)
Related stories
IsoFraction, an LNG sampling system for terminals
Liquid Natural Gas receipt terminal operators have become very interested in sampling systems to monitor the quality of LNG received from suppliers, since the product can age during transport
Two simultaneous samples can be taken using the system cell sampler pumps, which are mounted directly into the bypass loop that passes through the cabinet.
Each sample is piped to a dedicated constant pressure sample receiver, where the collected samples are stored and maintained at line pressure.
The receivers incorporate magnetic level and proximity sensors.
The system was mounted in a GRP enclosure complete with Ex heating and lighting.
The static mixer could be used because flow turndown is low.
• Jiskoot: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
