Product category:
Ultrasonic and Clamp-on liquid flowmeters
News Release from: Katronic Technologies | Subject: KATflow 160
Edited by the Processingtalk Editorial
Team on 24 November 2003
Clamp-on ultrasonics for off-shore duty
BG Group (British Gas) examined the design of their new Minerva platform, and specified a Katronic ultrasonic clamp-on flowmeter, which has exceeded expectations in operational tests
What do you do when you need a flowmeter for a high-pressure system where reliability and accuracy are of great importance, the system is under high pressure, AND the meter needs to be installed in a Zone 1 hazardous area This is the exact situation that was faced by BG Group on their new North Sea Minerva Platform
This article was originally published on Processingtalk on 6 Apr 2004 at 8.00am (UK)
Related stories
The new KATflow 160 clamp-on ultrasonic flowmeter
The new KATflow ultrasonic flowmeters are designed to meet the demands of a wide variety of industry applications, whilst maintaining the Katronic values of accuracy, ease of use and reliability
Offshore success of new ultra-sound flowmeter
The European Offshore Industry has proved to be an ideal testing ground for the new KATflow 160 ultrasonic flowmeter: even on a buoy operating off solar-powered rechargeable cells
When BG Group (British Gas) examined the design of their new Minerva platform, they realised that they were going to encounter problems with the measurement of the liquid produced by a number of selectable gas lines.
No flowmeter had initially been included in the design of this system although it was later decided that it was necessary to be able to monitor the quantity of this water being produced in order to better understand how efficiently the gas wells were operating.
The main problem faced by the engineers at BG Group was the process conditions that the pipeline was subjected to.
Further reading
Clamp-on flowmeter is success in hazardous areas
The KATflow 160 ultrasonic flowmeter from Katronic Technologies is ATEX approved explosion-proof and has proved popular for applications in hazardous areas throughout Europe
Ultrasonic flow for difficult water applications
Obtaining useful flow measurement data is not always easy, though there are some applications in the water industry which are harder than others
How to attach clamp-on ultrasonic sensors
When discussing the relative merits of the operation and installation of a clamp-on ultrasonic flowmeter, one of the most commonly raised questions relates to the physical mounting of the sensors
As Gordon Robinson, Juno Commissioning Manager explains: "The platform process system is designed for normal operating pressure of 90 barg, but this may reach 280 barg in certain shutdown conditions".
It was therefore decided that the best option available to them was to install a clamp-on ultrasonic flowmeter, as this ensured that system pressure was not a factor in the reliability of the flow readings.
The engineers also discussed the possibility of using a turbine flowmeter on the system but as the produced water system is subject to gas blow-by there was a risk of compromised results and damage to the turbine flowmeter.
It was therefore decided that this was not a viable option.
According to Gordon, "a non-intrusive system removes the need for process tapping points and hence improves the overall safety by reducing the number of possible leak paths".
To further complicate matters, as the meter was for use offshore where the area in which the flowmeter was installed was classified Zone 1.
It was therefore essential that any equipment purchased was not only certified for hazardous area use, but also preferably to the new ATEX directive standards thus conforming to the latest European legislation.
It was at this point that BG Group turned to Katronic Technologies to supply a solution in the form of the new KATflow 160 clamp-on ultrasonic flowmeter.
The meter and sensors are not only fully ATEX certified but also satisfied the project requirement for a non-invasive system ensuring that process conditions were not compromised.
As the clamp-on sensors for the KATflow 160 are fully non-invasive there was no need to cut into the pipeline.
This ensured that installation time and costs were kept to a minimum and that no system re-engineering was required in any way.
Furthermore, as the sensors are mounted on the outside of the pipeline there was no risk that they could be damaged by any of the adverse conditions that are known to exist within this produced liquid system.
When making the choice of which flowmeter to use, BG Group had to consider other factors beyond simply the pressure and the hazardous area legislation requirements.
There were also serious concerns about the accuracy of the meters under consideration, owing to the non-ideal installation conditions for the flow sensors.
As Gordon Robinson again explains, "The Katronic system was the only system that would provide a 10% accuracy without considerable pipe-work modifications.
Most instruments will require suitable straight lengths to provide the specified accuracy.
The Katronic system obtained the required accuracy with existing pipe work that seemed unachievable by others".
The advanced sensor and digital processor technology employed within the Katronic flowmeters allows their meters to produce reliable flow readings even when subjected to difficult conditions such as high levels of flow disturbance, or solid and gas content.
Once offshore the flow transmitter and sensors were mounted adjacent to each other directly on the pipeline, this allowed for easy commissioning and verification of the flow readings through the local digital display.
All programming of the flowmeter was done using the magnetic pen provided with the flowmeter ensuring the adjustments can be made to the settings without needing to expose the flowmeter electronics to the hazardous environment.
Following commissioning the measured data was then fed back to the DCS in the control room via the digital relay and 4-20 mA outputs that are included in the meter as standard.
Gordon was impressed with how easy the flowmeter was to install and commission and described the KATflow 160 as "simple to maintain and operate" and also that the unit was "easy to interface with other instrumentation and the DCS".
As the project was under considerable time pressure an engineer from Katronic Technologies was made available during the commissioning phase.
Although the flowmeter is straightforward to operate it was felt that this was necessary in order to ensure that everything went as smoothly as possible during the complex procedure of bringing the platform on-line.
These efforts were appreciated by British Gas who commented, "as a group we are extremely satisfied with the support provided during the interfacing and commissioning".
Due to the technology shift from turbine to ultrasonic flowmeters, British Gas has instigated performance checks on the KATflow 160 following its installation in March this year.
This was done in order to ensure that the meter has maintained the performance that it showed at the time of commissioning and that it remains within the project accuracy requirements.
In reality what these tests have shown is that the flowmeter is in fact far surpassing expectations; as Gordon Robinson says, "Our initial requirement was to install a meter capable of 10 percent accuracy.
The accuracy of the Katronic meter has been checked against batch measurements and is currently providing an accuracy of better than 5 percent".
As well as the ease of installation, one of the big advantages of this type of ultrasonic flowmeter is that as there are no moving parts and no contact with the fluid, thus there is no reason why this level of performance could not be maintained.
If you would like any further information on this or any other application or product please contact Katronic Technologies. Request a free brochure from Katronic Technologies ...
• Katronic Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
