Product category:
Potable water metering and distribution
News Release from: Katronic Technologies | Subject: Katflow in water applications
Edited by the Processingtalk Editorial
Team on 10 January 2008
Ultrasonic flow for difficult water
applications
Obtaining useful flow measurement data is not always easy, though there are some applications in the water industry which are harder than others
Imagine the scenario: You have to measure the flow of liquid through a pipeline, the pipe is over a metre in diameter, you can only get access to the top of it and the only available access is via a narrow pit in the ground This is exactly the situation in which engineers from Katronic Technologies and their customers are finding themselves on a regular basis, and ironically the solution is more simple than it might seem
This article was originally published on Processingtalk on 21 Nov 2007 at 8.00am (UK)
Related stories
How to attach clamp-on ultrasonic sensors
When discussing the relative merits of the operation and installation of a clamp-on ultrasonic flowmeter, one of the most commonly raised questions relates to the physical mounting of the sensors
Katronic Hire Service gains enthusiastic welcome
Recently Katronic has seen an increased demand and interest in the hire of their KATflow clamp-on flow measurement products
Unfortunately for water companies around the country the difficult situation mentioned is not only becoming more common - it often occurs for a measurement that is essential to the efficient operation of their network.
In an effort to reduce leakage and monitor water distribution it is important to be able to determine flow at a variety of points around a network.
The drawback is that in order to do this, pipes are often not exposed, or access is via small chambers in frequently inconvenient places where only the top of the pipeline is accessible.
Further reading
Clamp-on flowmeter shows benefits as test device
A "robust and reliable" KATflow ultrasonic flowmeter has been successfully applied in a 'Testing' application at British Nuclear Group, on nitric acid and hazardous chemicals
Clamp-on flowmeters on Duplex pipe-work
Duplex materials, ideal for offshore use, are difficult to weld and harder to work with, so clamp-on flowmeters would be ideal: Katronic have shown their units can achieve the performance needed
Ultrasonic flowmeter proves "Precise and Reliable"
For a major water and wastewater management and engineering company installation in South America, Biwater turned to Katronic Technologies to supply clamp-on equipment for a 60 inch line
Trials of different metering systems have proved that one of the best ways to measure the application is to mount clamp-on ultrasonic transducers on the top of the pipe and to then use either a portable or installed transmitter unit to monitor the flow readings.
The problem is that anyone who has ever been involved with ultrasonic flowmeters would agree that the application described is far from ideal.
Katronic Technologies however are proving that their instruments are up to this most difficult of jobs.
Even with this installation style and these sizes of pipes, the KATflow ultrasonic meters are able to provide the reliable readings that customers need.
At one location the ultrasonic probes were even installed directly onto the 10mm thick bitumen coating on the pipe, and still provided results in line with what the customer was expecting.
The information provided by Katronic is vital to these customers, as in many cases the clamp-on ultrasonic flowmeters provide the only way for engineers to detect possible leakage in such large pipes and to identify the exact location.
Other flowmeters are available for conduits of this size, but they all involve pipe modification and the cost and time associated with this.
Even insertion electromagnetic flowmeters have limitations for these applications.
The length of the flow probes needed for these commonly used instruments can mean that it is impossible to close the chamber during flow measurement, which creates security and safety issues.
Furthermore, detritus carried within the flowing water can bend the probes, damaging them or causing them to become stuck, thus rendering the metering system useless.
Once a possible metering location is identified a portable KF220 ultrasonic flowmeter can be used to evaluate the application - prior to installing another KATflow meter on a permanent basis.
Another advantage of the Katronic meters is the range of installation options: all of the sensors can be provided with mounting shoes for either magnetic or weld mounting, and as the sensors are available as IP68 and can be supplied with solid coupling pads, water ingress is not an issue.
Futhermore, the compact size of the Katronic ultrasonic probes means that there is no problem getting the system installed in even the most confined spaces.
For more information on applications for these clamp-on flowmeters, the new solid sensor coupling, or any other details on the KATflow range, please contact Katronic Technologies. Request a free brochure from Katronic Technologies ...
• Katronic Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
