Product category:
Pressure measurement systems
News Release from: Kistler Instruments | Subject: Type 9234A
Edited by the Processingtalk Editorial
Team on 14 July 2004
Versatile strain sensor has integrated
electronics
The new Type 9234A piezoelectric strain sensor from Kistler Instruments has an integrated charge amplifier with remote control of measuring range and provides an analogue output voltage of +/-10V
The new Type 9234A piezoelectric strain sensor from Kistler Instruments has an integrated charge amplifier with remote control of measuring range and provides an analogue output voltage of +/-10V Each of two measuring ranges can be adjusted to a particular value or signal curve in one hundred steps using either a dedicated remote control unit or directly by the machine's own PLC
This article was originally published on Processingtalk on 26 May 2004 at 8.00am (UK)
Related stories
Miniature pressure sensor uses new DCE technology
A miniature piezoresistive absolute pressure sensor, Type 4005A, from Kistler uses Direct Chip Exposure technology to give superb linearity, minimal hysteresis and an extremely high natural frequency
Miniature industrial triaxial accelerometer
The new Kistler miniature triaxial accelerometer has been designed for use in aggressive environments such as engine applications, vibration testing and industrial quality control applications
When the measuring range is adjusted, the setting is stored by the integral electronics.
The range can be switched remotely, even under load conditions, enabling very low forces to be accurately measured.
Typical applications for the sensor are monitoring C-frame machine tools such as presses and automatic assembly machines, preventing overload of mechanical presses, quality control of riveting, clinching and resistance spot welding processes and detection of tool breakage or collision in a wide variety of machine tools.
Secured to a suitable clean, unpainted position on the machine frame by a single M6 screw, the sensor is especially easy to retrofit to almost all types of machine tools.
The sensor measures dynamic and quasi-static stresses on machinery or structural surfaces using indirect force measurement.
The signal can be further processed as a relative value or the sensor can be calibrated against an appropriate standard to provide absolute measurements in N or kN.
Cable connection is by an M12-8-pin socket mounted either on the end or upper face of the sensor using screened cables available with straight or right-angled connector.
Although designed for real world, industrial applications, the new strain transmitter is equally suited to research and development applications requiring ease of installation and precision combined with versatility and reliability.
• Kistler Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
