Product category:
Pressure measurement systems
News Release from: Kistler Instruments | Subject: Type 6155AE
Edited by the Processingtalk Editorial
Team on 22 April 2005
Adaptor based pressure sensor for mould
inserts
The new adaptor based Type 6155AE mould pressure sensor from Kistler allows moulds to be disassembled and inserts changed simply and quickly without risk to the sensor or its cable.
The new adaptor based Type 6155AE mould pressure sensor from Kistler allows moulds to be disassembled and inserts changed simply and quickly without risk to the sensor or its cable The adaptor based sensor is mounted on the mould retaining plate where the single wire technology allows the sensor cable to be led through a simple drilled hole
The sensors are accurately aligned with drilled holes in the insert, making mould inspection easier and maintenance costs significantly lower.
For moulds without cavity inserts, the adaptor based sensor is mounted on the second mould plate.
The adaptor based sensor is especially suitable for use in complex moulds with extensive cooling.
• Kistler Instruments: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
