FDA food-grade lubricants approved to NSF H1
Good news for all those using Barrierta L 55/2, the high-temperature and long-term lubricant for duties up to 260C, particularly in the textile, packaging and food-processing industries
Good news for all those using Barrierta L 55/2, the high-temperature and long-term lubricant for duties up to 260C.
For decades this proven special lubricant, based on perfluorinated polyether (PFPE), has been successfully used for a large variety of applications such as bearings subject to high temperatures in the textile, packaging and food-processing industries.
Now Barrierta L55/2 even fulfils the requirements of FDA for food-grade lubricants and has been approved according to NSF H1.
As an H1 lubricant, Barrierta L55/2 can also be used for applications with incidental food contact, eg for automatic bakery ovens, stoves or conveyor chains.
Most of the products of the Barrierta L55/2 series are NSF H1 registered.
These white special greases are available in 4 penetration grades thus covering a large range of applications.
Barrierta is the oldest European premium brand for PFPE lubricants.
Barrierta products are subject to continuous development and are one of the most widely used PFPE lubricants around the world.
Not what you're looking for? Search the site.
Tel +44 1422 319146
-
Kluber introduces new range of oils
The new range of Kluberoil 4 UH 1 N oils have been especially formulated for use in the food processing and pharmaceutical industries. -
Klubersynth saves further energy in brewery
Following a successful trial of Klubersynth in Elevator gearboxes at a major brewery, further trials on their conveyor gearboxes led to energy savings approaching GBP100k per annum -
Brewery saves energy and improves food compliance
A major UK Brewery, faced with the task of reducing their overall costs, whilst maintaining food grade compliance, has saved GB15000 in energy alone by converting to Klubersynth on elevator gearboxes -
One grease lubricates all wind turbine bearings
Kluber Lubrication has succeeded in developing a single grease for use on all bearing lubrication points in a wind turbine installation - the solution for all is Kluberplex BEM 41-141 -
Grease for higher productivity of aseptic filling
Kluberfood NH1 87-703 Hygienic is a grease designed for use in aseptic cold filling plants, where sensitive beverages or food products are filled into sterile containers under aseptic conditions
Categories
- Plant Instrumentation (5,478)
- Process Control and Management (2,525)
- Communications and HMI (2,535)
- Process Plant and Equipment (6,164)
- Processing Industry Events and Services (3,198)
- News from specific industry sectors (2,263)
- ENVIRO-Talk - Environment + Pollution (550)
- FLOWtalk - Flow Measurement (753)
- WATER-Talk - Water Industry News (1,211)