Product category:
Bearings, lubrication, oil and filters
News Release from: Kluber Lubrication GB | Subject: Kluberalfa YV 93-302
Edited by the Processingtalk Editorial
Team on 08 June 2004
The first oxygen sliding agent with
approvals
Kluberalfa YV 93-302 is the world's first and only high-pressure sliding agent for oxygen installations that meets the stringent requirements for lubricants that may come into contact with food
Kluberalfa YV 93-302 is the world's first and, to our knowledge, only high-pressure sliding agent for oxygen installations which at the same meets the stringent requirements for lubricants that may come into contact with food products Kluberalfa YV 93-302 thus closes a gap, being suitable in particular for applications involving breathing oxygen
This article was originally published on Processingtalk on 22 Apr 2004 at 8.00am (UK)
Related stories
BAM and food grade approved lubricating grease
Kluberalfa YV 93-302 is the latest in high performance non-flammable high pressure sliding agents for use in oxygen/medical/food processing equipment where conventional lubricants are hazardous
Such installations are found, for example, in medical applications and the diving sector, and the sliding agents used are directly exposed to the gas.
It is therefore not impossible for the air to contain some of the sliding agent.
For this reason, it is very important in such applications that the sliding agent does not pose any health hazard whatsoever.
Pure oxygen is an aggressive gas encouraging explosion, but also a fundamental prerequisite of human life - it should be handled with utmost care for both reasons.
Kluberalfa YV 93-302 has passed the oxygen pressure test at the BAM (German Institute for Materials Research and Testing) and is listed as an NSF-H1 lubricant. Request a free brochure from Kluber Lubrication GB ...
• Kluber Lubrication GB: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
