Click on the advert above to visit the company web site

Product category: Bearings, lubrication, oil and filters
News Release from: Kluber Lubrication GB | Subject: Kluberfluid C-F3 to 8 ULTRA
Edited by the Processingtalk Editorial Team on 23 June 2004

How to save with clean lubrication of
large gears

The adhesive lubricants of the Kluberfluid C-F3 to 8 ULTRA series make the handling of large open girth gear drives a clean affair: these lubricants are free from graphite and allow online inspection

The adhesive lubricants of the Kluberfluid C-F3 to 8 ULTRA series make the handling of large open girth gear drives a clean affair: these special lubricants are free from graphite and allow tooth flank inspection while the drive is running Lower consumption quantities will reduce your maintenance and disposal costs, facilitate cleaning and decrease the need for keeping extensive stocks

Now you can compare the graphite-free Kluberfluid C-F3 ULTRA with graphite-containing adhesive lubricants using our interactive online calculator.

Simply check for yourself if you can reduce your lubricant consumption and consequently save costs.

Log onto the Kluber website and open services/large gear lubrication.

Kluber has developed this calculator on the basis of many years of experience in the lubrication of large girth gear dives.

The parameters flank width, drive type, lubricant and operating hours are taken into account.

Then you can enter a lubricant price per kilogram to see the effect a particular lubricant has on your budget when seen over a whole year. Request a free brochure from Kluber Lubrication GB ...

Kluber Lubrication GB: contact details and other news
Email this article to a colleague
Register for the free Processingtalk email newsletter
Processingtalk Home Page

Search the Pro-Talk network of sites

Visit the Dichtomatik web site