Special lubricant for oscillating bearings
Kluberlub BEM 41-122 is a specially formulated and test-rig tested lubricant for plain and rolling bearings subject to reversing motion, particularly for oscillating bearings subject to high load
Oscillating bearings subject to high load, boundary or mixed friction conditions, often suffer excessive wear as a direct result of inadequate lubrication protection! Kluberlub BEM 41-122 is a specially formulated and test-rig tested lubricant for plain and rolling bearings subject to reversing motion.
Typical applications for Kluberplex BEM 41-122 are.
* Pivoting, self aligning, Spherical plain bearings.
* Self aligning "Rose joints" and Track Rod ends.
* Rolling bearings subject to reversing motion.
* Plain bearings, Bushes, Joints, Levers, Fulcrum points Motorcycle/cycle swinging arms Automotive Rod ends Pneumatic cylinder eyes Hoist sling pins Aircraft flaps Cranes.
Basically Kluberplex can be used in any application where lifetime lubrication is required in a non 360 degree rotating (oscillating) application with a wide temperature range from -30 to +140 degC and high load resistance.
The special benefits of the product can be explained as follows: lubricant displacement occurs in the loaded contact zones of bearings subject to oscillating motion with excessive lubricant losses and unprotected friction surfaces resulting.
The special formulation of Kluberlub BEM 41-122 enables highly effective anti wear solid lubricant "tribo-layers" to be generated between the loaded contact zones of the bearing.
These layers enable a separating and friction reducing effect resulting in greatly improved lubrication and wear protection.
Kluberlub BEM 41-122 is a special "tailor made" and cost effective solution to combat traditional bearing seizure, scuffing damage and wear occurring in oscillating or pivoting plain and rolling element bearings.
For more information on Kluberlub BEM 41-122 why not contact the Marketing and Application Engineering at Kluber Lubrication (GB).
Not what you're looking for? Search the site.
Tel +44 1422 319146
-
Kluber introduces new range of oils
The new range of Kluberoil 4 UH 1 N oils have been especially formulated for use in the food processing and pharmaceutical industries. -
Klubersynth saves further energy in brewery
Following a successful trial of Klubersynth in Elevator gearboxes at a major brewery, further trials on their conveyor gearboxes led to energy savings approaching GBP100k per annum -
Brewery saves energy and improves food compliance
A major UK Brewery, faced with the task of reducing their overall costs, whilst maintaining food grade compliance, has saved GB15000 in energy alone by converting to Klubersynth on elevator gearboxes -
One grease lubricates all wind turbine bearings
Kluber Lubrication has succeeded in developing a single grease for use on all bearing lubrication points in a wind turbine installation - the solution for all is Kluberplex BEM 41-141 -
Grease for higher productivity of aseptic filling
Kluberfood NH1 87-703 Hygienic is a grease designed for use in aseptic cold filling plants, where sensitive beverages or food products are filled into sterile containers under aseptic conditions
Categories
- Plant Instrumentation (5,478)
- Process Control and Management (2,525)
- Communications and HMI (2,535)
- Process Plant and Equipment (6,164)
- Processing Industry Events and Services (3,198)
- News from specific industry sectors (2,263)
- ENVIRO-Talk - Environment + Pollution (550)
- FLOWtalk - Flow Measurement (753)
- WATER-Talk - Water Industry News (1,211)