Kluber introduces new range of oils
The new range of Kluberoil 4 UH 1 N oils have been especially formulated for use in the food processing and pharmaceutical industries.
Kluber said that these lubricating oils exhibit excellent anti-wear and EP properties, as well as excellent low temperature characteristics.
Kluberoil 4 UH 1 N oils are miscible with mineral oils and polyalfaolefin oils.
However, Kluber recommends cleaning the oil circulation system or flushing it with the new oil prior to using Kluberoil 4 UH 1 N for the first time.
This lubricant is certified as H1, which means that it has been designed and registered for incidental, technically unavoidable food contact.
Further benefits from the Kluberoil 4 UH 1 N oils include a wide operating temperature range, good ageing and oxidation stability, high scuffing load capacity, neutrality towards seals and paints, plus higher viscosity variants that fulfil CLP requirements.
Not what you're looking for? Search the site.
Tel +44 1422 319146
-
Klubersynth saves further energy in brewery
Following a successful trial of Klubersynth in Elevator gearboxes at a major brewery, further trials on their conveyor gearboxes led to energy savings approaching GBP100k per annum -
Brewery saves energy and improves food compliance
A major UK Brewery, faced with the task of reducing their overall costs, whilst maintaining food grade compliance, has saved GB15000 in energy alone by converting to Klubersynth on elevator gearboxes -
One grease lubricates all wind turbine bearings
Kluber Lubrication has succeeded in developing a single grease for use on all bearing lubrication points in a wind turbine installation - the solution for all is Kluberplex BEM 41-141 -
Grease for higher productivity of aseptic filling
Kluberfood NH1 87-703 Hygienic is a grease designed for use in aseptic cold filling plants, where sensitive beverages or food products are filled into sterile containers under aseptic conditions -
Deep drawing lubrication oil for food containers
When making food packages out of aluminium foil by means of rolling and deep-drawing, the lubricant plays a major role: but this must be removed so that it does not contaminate the food
Categories
- Plant Instrumentation (5,478)
- Process Control and Management (2,525)
- Communications and HMI (2,535)
- Process Plant and Equipment (6,164)
- Processing Industry Events and Services (3,198)
- News from specific industry sectors (2,263)
- ENVIRO-Talk - Environment + Pollution (550)
- FLOWtalk - Flow Measurement (753)
- WATER-Talk - Water Industry News (1,211)