Product category:
Ultrasonic and Clamp-on liquid flowmeters
News Release from: Krohne | Subject: Ultrasonic GFM 700 SE
Edited by the Processingtalk Editorial
Team on 06 June 2003
Krohne supercritical ethylene cost
savings
An ultrasonic flowmeter designed for use in supercritical ethylene has been chosen by chemical companies, in preference to turbine and density meters, because of cost savings and outstanding accuracy
The consortium members, which include the chemical giant Dow, are all connected to the European Ethylene Pipeline, a major distribution network supplying ethylene to production sites, sea terminals and consumers across Europe The group has carried out extensive trials using the Krohne ultrasonic GFM 700 SE to measure the mass and volume flow of supercritical ethylene, and has selected it as the favourite for custody transfer purposes
This article was originally published on Processingtalk on 14 Aug 2008 at 8.00am (UK)
Related stories
Krohne flow product showcase in Scotland
All roads lead to Aberdeen this September 3rd and 4th for the biennial Instrumentation Scotland and Offshore Systems exhibition, and Krohne teams up with Hamall to present oil and gas flow products
Entry level, high performance flow converter
Krohne has launched the IFC100, a signal converter for its Optiflux range of electromagnetic flowmeters that offers excellent performance at an entry level price
Ethylene is a raw material used in the petrochemical industry for production of synthetic materials such as polythene and polystyrene, as well as solvents and coatings.
It is a difficult medium to measure because its density can change dramatically with relatively small fluctuations in temperature or pressure; therefore, constant pressure and temperature need to be maintained at all times.
During transportation ethylene is kept in a supercritical state, which means it is neither a gas nor a liquid.
Further reading
Krohne solution for accurate bulk measurement
Krohne has launched the Optimass 2000, a large diameter Coriolis mass flowmeter that offers a solution for accurate bulk measurement in the oil and gas, chemical, food / beverage and pharma industries
ABM chooses Krohne Optimass 1300 for dosing
ABM, a major supplier of mixing, distillation and fermentation systems, has chosen the Krohne Optimass 1300 Coriolis mass flowmeter for a dosing solution it has supplied to a major UK drinks producer
In spite of being in a state of high density, the fluid behaves much like a gas and is inflammable and potentially explosive.
The conventional method of measuring the flow of supercritical ethylene consists of a gas turbine meter in combination with an inline density meter installed downstream.
However, there are a number of disadvantages with this method; any temperature difference between the turbine and the density meter results in an error of the mass flow measurement, and at low and high flow rates the turbines become inaccurate because they have a small dynamic range.
These intrusive technologies also cause a 1 bar pressure loss.
The use of turbine meters to measure supercritical ethylene also has high cost implications.
Expensive filters need to be installed because the meters are sensitive to small particles, and frequent maintenance and calibration is required to maintain high accuracy since they suffer wear from internal moving parts.
In comparison with turbine meters, ultrasonic meters, do not obstruct the flow or cause a drop in pressure because they have no moving parts.
This means less pumping capacity is required which enables a saving in energy and cost.
The ultrasonic meter is also insensitive to particles and does not require filters.
Moreover, costly re-calibrations with the GFM 700 SE are also unnecessary due to the long term reliability of the meters.
In addition to providing volumetric readings the GFM 700 SE can also produce highly accurate mass flow measurements simply by using a flow computer and an absolute pressure transmitter.
Sound velocity data collected by the flowmeter is fed into a flow computer, the OMNI 3000, and by using KROHNE software with a unique density model, the mass flow can be determined.
• Krohne: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
