Product category:
Coriolis mass flowmeters
News Release from: Krohne | Subject: OPTIMASS 7000
Edited by the Processingtalk Editorial
Team on 06 January 2005
Optimass 7000 ensures new product
quality
Lucite International is using the Optimass 7000 Coriolis mass flowmeter to ensure its new product is manufactured to strict dimensional tolerances, by correctly measuring the acrylic syrup delivered
Lucite International UK , a global leader in the design and manufacture of acrylic-based products, is using Krohne Optimass 7000 Coriolis Mass flowmeters to ensure its new product is manufactured to strict dimensional tolerances The Lucite Darwen-based plant is a 24 hour operation that manufactures acrylic sheet, used predominantly for manufacturing baths
This article was originally published on Processingtalk on 4 Dec 2006 at 8.00am (UK)
Related stories
Chemicals company selects Krohne for accuracy
A leading international supplier of coatings and plastics additives has chosen to use the Krohne Optimass Coriolis mass flowmeter in its laboratories and production plants after comparative tests
Ilford uses Optimass to improve production quality
World leader in inkjet innovation, Ilford Imaging, has installed two of the Krohne advanced Optimass 7000 Coriolis mass flowmeters, which improve product quality and increase production
During production of its new product a precise amount of acrylic syrup mixture is measured and cast to produce a flat acrylic sheet.
The sheets are manufactured to a strict dimensional tolerance and precise measurement of the mass of acrylic syrup is critical to achieving this.
Overfilling can lead to deformation in the surface quality of the sheet, while under-dosing can result in voids or holes.
Further reading
Brewed to perfection with Optimass
Results in customer trials showing the ability to handle high viscosity products at low flow rates, have led Decker Maschinenbau to adopt the Krohne Optimass mass flowmeters for hops extraction
Krohne flow product showcase in Scotland
All roads lead to Aberdeen this September 3rd and 4th for the biennial Instrumentation Scotland and Offshore Systems exhibition, and Krohne teams up with Hamall to present oil and gas flow products
Entry level, high performance flow converter
Krohne has launched the IFC100, a signal converter for its Optiflux range of electromagnetic flowmeters that offers excellent performance at an entry level price
Inaccurate measurement of the acrylic syrup results in significant waste and rework.
Lucite needed to measure the flow rate of the acrylic syrup to an accuracy of 0.5 per cent.
This was made particularly difficult because of its high viscosity - approximately 3,000 centipoise.
Initially mechanical flowmeters were used to measure the flow rate of syrup into the casts.
However, the pressure drop across these flowmeters was found to be too high and did not provide the required level of accuracy or stability of calibration - particularly when used with the viscous syrup.
The Krohne Optimass 7000 flowmeter enables Lucite to measure precisely the amount of acrylic syrup mixture that is cast into acrylic sheets, ensuring the new product's consistent dimensional accuracy.
During manufacture raw liquid methyl methacrylate is fed into a mixing vessel where it is combined with other additives.
It is then passed through the Optimass 7000 flowmeter before being cast.
The Optimass 7000 with its single straight measuring tube features a patented AST design that offers outstanding accuracy and stability when used on low flow rate applications that are common with high viscosity products.
A signal from the Optimass 7000 is fed to a PLC which operates pouring valves that control the flow of the acrylic syrup into the cast.
This is the first time Lucite has used Krohne flowmeters at the Darwen site.
Rickey Donald, engineering projects manager, at the company said: "The mechanical flowmeters we initially intended to use were not accurate enough for us to meet production tolerances.
I carried out an investigation to evaluate the technical capabilities of flowmeters on the market as well as the costs.
The Krohne Optimass 7000 flowmeters met our measurement accuracy needs and this, along with the company's reputation for quality and reliability, was a key factor in my decision to choose its products." The Krohne Optimass 7000 Coriolis flowmeter was the first of its kind to incorporate a single straight tube design, which results in minimal pressure drop across the meter.
It has also been designed without flow dividers.
These features allow viscous liquids to be pumped at relatively low pressure without being restricted by the meter.
• Krohne: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
