Product category:
Liquid Analysis: Titration, HPLC, IC
News Release from: Lablogic Systems | Subject: Radio HPLC
Edited by the Processingtalk Editorial
Team on 17 November 2005
Radio HPLC detector is GLP-compliant
A flowcell identification system to meet GLP requirements is one of the features of the new Model 4 Beta-RAM on-line radio HPLC flow-through detector
A flowcell identification system to meet GLP requirements is one of the features of the new Model 4 Beta-RAM on-line radio HPLC flow-through detector Also new is a sensor that prevents over-pressure build-up by tripping out above a pre-set point, displaying a flow error message and relaying a signal that can be used to shut down the mobile phase flow and/or bypass the detector
Already noted for its compactness, the Beta-RAM is smaller than ever in its Model 4 version.
At 152 x 348 x 330 mm, the vertical cabinet occupies only a third of the bench space needed by detectors from other leading manufacturers.
The Beta RAM uses high-specification 1 inch photomultiplier tubes to provide the best counting efficiency combined with the lowest background, which collectively provide the best signal-to-noise ratio currently available. Request a free brochure from Lablogic Systems ...
• Lablogic Systems: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
