Visit the Orthos (Engineering) web site
Click on the advert above to visit the company web site

Product category: Boilers, Heat Exchangers, Dryers and Refrigeration
News Release from: Labtex | Subject: Huber 'Flow- through Chillers'
Edited by the Processingtalk Editorial Team on 05 June 2006

Flow through coolers and immersion
coolers

Huber 'Flow- through Chillers' are designed for simple low demand cooling applications, to remove heat and accelerate cooling around room temperature

Huber 'Flow- through Chillers' are designed for simple low demand cooling applications They are commonly used with simple heating circulators to remove heat and accelerate cooling around room temperature

Flow through coolers can also widen the temperature range of any thermostat with the ability to control to -30C.

The DC range are compact stand alone refrigeration units with a control range of -30C to +50C.

Flow through coolers have no pump and therefore must be used in conjunction with an existing circulator.

'Dip' or 'Immersion Coolers' are ideal for simple cooling applications when low temperatures are required in vapour traps and Dewar vessels etc.

They can also be used to remove heat from other thermostatic circulators.

Three models are available to -45C, -50C and -100C.

Two versions are available with and without control.

The digital version will control at a set temperature to within +/- 0.5K and the standard version can be used in conjunction with an immersion heater to achieve set temperatures between ambient and the lowest achievable temperature of each particular model.

Immersion probes are available in rigid or flexible designs. Request a free brochure from Labtex ...

Labtex: contact details and other news
Email this article to a colleague
Register for the free Processingtalk email newsletter
Processingtalk Home Page

Search the Pro-Talk network of sites

Visit the Dichtomatik web site
Visit the Orthos (Engineering) web site