Smart camera has motor-driven focus adjustment
A
Leuze Electronic product story
Edited by the Processingtalk editorial team
May 27, 2009
Leuze Electronics has launched the LSIS 400i smart camera, featuring homogeneous lighting, motor-driven focus adjustment and integrated configuration software within an IP65-rated unit.
The illumination system was invented using special optics, instead of conventional LEDs.
LSIS 400i smart camera
Eight rectangular segments fitted with precisely calculated, free-form shapes, generate a homogeneous, intense, rectangular light pattern in the range from 50-250mm.
A motor-driven focus adjustment function enables the focus to be adjusted from any PC for setup.
The entire image-processing software is integrated inside the LSIS 400i and accessible using a web browser.
Focus settings and other criteria such as object detection are stored within the camera.
This enables a PLC or even just a switch to select the program and respective focus setting for the distance between the camera and that production run.
Not what you're looking for? Search the site.
Contact Leuze Electronic
Tel +44 1480 408500
Other Leuze Electronic stories
-
Leuze switches offer distances up to 40mm
Leuze has expanded its range of high-quality inductive proximity switches, including models with switching distances of up to 40mm. -
Leuze expands milk company's data transmission
Leuze Electronic has enabled a milk producer's registration and acceptance processes with its RFID system. -
Explosion-proof sensors added to Leuze range
Leuze Electronic has extended its range of explosion-proof optical sensors with several new versions, and added a range of new protection housings. -
Photo sensors from Leuze awarded EHEDG certificate
Leuze electronic has introduced a photoelectric sensor series capable of withstanding the frequent and intensive cleaning and disinfection cycles demanded by a growing number of processing industries -
Opto-sensors tolerate cleaning and disinfection
The latest addition to the Leuze comprehensive range of opto-sensors is very much at home on food and pharmaceutical processing lines, where strict hygiene regulations are enforced
Browse by category
- Plant Instrumentation (6589)
- Valves and manifolds (596)
- Valve positioners and actuators (210)
- Level and tank contents instrumentation (511)
- Temperature measurement: Conventional (314)
- Temperature measurement: IR techniques (294)
- Pressure measurement systems (443)
- Weighing systems, Strain gauges (555)
- Liquid Analysis: Titration, HPLC, IC (340)
- Gas monitoring and analysis (351)
- Environmental sensors and sampling systems (59)
- Optical sensors and vision systems (247)
- Fire, smoke and gas leak detection (140)
- Condition monitoring and vibration analysis (417)
- Position, speed and torque measurement (487)
- Electrostatics, lightning and earthing (96)
- Medical, biological and bacteriological sensors (8)
- Humidity and moisture sensing systems (219)
- Powder, droplet and particle characterisation (329)
- Corrosion Monitoring (13)
- Liquid Analysis: Spectroscopy, Colour (291)
- Noise and acoustics measurement (70)
- Liquid Analysis: Turbidity, Particles (29)
- Liquid Analysis: DO, Ozone, BOD, TOC (64)
- Liquid Analysis: pH, Conductivity, ISE (206)
- Liquid Analysis: Viscosity, Density (146)
- Positioners, servo drives (151)
- Process Control and Management (3038)
- Communications and HMI (2977)
- Process Plant and Equipment (7474)
- Processing Industry Events and Services (3625)
- News from specific industry sectors (2846)
- Environment, Pollution + Green Power (902)
- Flow Measurement (947)
- Water Industry News (1552)
