Product category:
Weighing systems, Strain gauges
News Release from: Marco | Subject: Triscan LNG weighing system
Edited by the Processingtalk Editorial
Team on 06 May 2004
Marco Weighing help for a cleaner
environment
Marco Weighing are working with Chive Fuels in setting up a nationwide network of Liquid Natural Gas refuelling stations to supply this alternative fuel to the growing number of gas powered vehicles
Leading weighing specialists Marco Weighing are working with Chive Fuels in the setting up of a nationwide network of Liquid Natural Gas (LNG) refuelling stations to supply this alternative fuel to the steadily growing number of operators of gas powered commercial vehicles Chive Fuels believe they can make a worthwhile contribution to the improvement of air quality by providing the means to displace traditionally fuelled vehicles with those powered by natural gas
This article was originally published on Processingtalk on 1 Jul 2008 at 8.00am (UK)
Related stories
Filling stations for ink cartridges
Factory floor efficiency experts Marco have installed two additional bespoke filling stations for leading ink manufacturer Fujifilm Sericol UK at their plant in Broadstairs, Kent
TRAC-IT MES packhouse solution for fruit in Dublin
Marco are pleased to announce a significant order for a complete TRAC-IT MES Packhouse Solution from leading multinational fresh produce supplier Keelings
However they realise that the rate of growth of LNG powered vehicles is directly proportional to the availability of the gas and the lack of suitable refuelling sites has, until recently, limited its use.
As a result, Chive have set up a program of installing LNG dispensing stations, conveniently located at motorway stations for vehicle operators around the UK.
There are currently six stations spread from the West Country to Scotland and another six are due on line shortly.
Further reading
Nutraceutical manufacturer counts on Trac-IT MES
Confidence in the installed Marco Trac-IT MES Factory Efficiency System at EuroCaps has resulted in a second prestigious order, now for a weigh count system to control and track finished goods packing
Trac-IT YCM Yield Control Manager attracts crowds!
Marco exhibited their complete packhouse solutions at the Fruit Logistica Exhibition in Berlin, and drew the attention of a large number of the 50,000 visitors
Leading fruit packer benefits from Marco Packhouse
A comprehensive Trac-IT MES Packhouse Solution is bringing significant benefits to a dedicated packhouse in the Richard Hochfeld fruit packing, grading and storage facility in Faversham, Kent
In addition, Chive have also installed private dispensing facilities for a number of transport operators.
Commercialisation of natural gas vehicles is underway after five years of trials and Government backing is providing real incentives for hauliers to convert.
Converting vehicles to run on gas has been shown to cut pollution by up to 80% and the annual cost savings to vehicle operators are significant, especially when grants of up to 75% of the conversion cost are available.
At today's prices, LNG is up to 30-35% cheaper than diesel and the road tax for gas powered vehicles is in the region of GBP500 lower.
LPG (Liquefied Petroleum Gas) has been used as a fuel for light duty vehicles for many years and a growing number of petrol stations in Europe have LPG pumps.
However LPG is not seen as a practical fuel for diesel powered vehicles over 3.5 GVW, due in part to the space and weight limitations and part to the disappointing power output.
LNG is often confused with LPG but there are significant differences in its composition and method of storage.
LPG is composed primarily of propane (upwards of 95%) and smaller quantities of Butane.
LPG can be stored as liquid in tanks by applying pressure alone.
In comparison, natural gas is composed primarily of methane (at least 90%).
'Pipeline' natural gas also contains small quantities of ethane, propane, oxygen, carbon dioxide and sulphur compounds as well as water.
When the gas is cooled to approximately minus160 degrees centigrade at atmospheric pressure it condenses to a liquefied natural gas, LNG.
The liquefaction process removes the oxygen, carbon dioxide and water and can also be designed to purify the LNG to almost 100% Methane, making it theoretically the cleanest of the 'alternative' fuels.
LNG has a high energy density because it occupies 1/600th the volume of natural gas under ambient conditions, making it ideal for energy storage in double-walled tanks.
The LNG fuel tank is a cryogenic container that is designed as two separate pressure vessels, one inside the other.
The insulated inner vessel stores the cold LNG in its liquid form and the space between the inner and outer vessel is then evacuated to produce a superior insulation system.
The typical weight of a 95 gallon tank when full is approximately 365 kg.
On a dedicated gas engine operating at 80% efficiency, one gallon of diesel is equivalent to 3.92 kg of natural gas.
Therefore for large vehicles, especially fleet vehicles, LNG becomes attractive due to the reduced on board weight and space requirements, excellent power output combined with lower system and running costs.
The refuelling facilities are paid for by Chive, and customers simply pay for the fuel they use.
The LNG dispensing system is designed by Triscan Systems who already supply vehicle refuelling systems for conventional fuels and LPG.
To measure the amount of LNG dispensed from the storage tanks, they initially looked at using a standard flow meter method.
Although this works well for LPG, they found that it was far from satisfactory for LNG.
Because LNG is stored at -160C, the change in temperature seen by the meter during an individual fill operation is significant and this introduces large errors.
It is not until the meter reaches a steady temperature that reasonable accuracy is achieved and discrepancies of up to 40% were seen in complete fills, a situation which is clearly not acceptable.
The only solution using this method would be to place the meter inside the tank, which was not seen as practical.
The only alternative was to weigh out the gas and at this stage, Chive turned to Sussex based Marco Weighing Systems for advice.
LNG is stored in super insulated vessels using proven and safe cryogenic techniques.
Each tank weighs 11000 kg when empty and holds 6000 kg of gas.
The solution offered by Marco involves mounting the complete storage tanks on four special self-aligning, high accuracy, 5000 kg load cell mounting assemblies.
The fully welded, IP66/68, stainless steel ring type load cells are ATEX certified for Zone 1 operation and connected through the latest MTL intrinsic safety barriers to a Lucid weight indicator in the safe area.
The special mounting assemblies, developed by Marco for aerospace weighing, ensure optimum load introduction even under adverse conditions and thus provide exceptional weighing accuracy and repeatability.
When a vehicle is refuelled, the system recognises the vehicle and zeros out the weigh system.
The amount of gas dispensed is then measured as a weight loss from the tank.
This information is transmitted via the Triscan system to the Chive offices in Reading and the operator is then invoiced for the amount of fuel dispensed.
The installed weighing systems are providing consistent accuracies of better than 1 kg.
Roy James, MD of Chive, is delighted with the system: " Marco's enthusiasm has matched our own in this project and they have been willing to be extremely flexible.
Initially we thought that we would need to weigh the gas in a smaller intermediary vessel but the results we are getting mean we do not have to go to this extra cost.
The weighing system not only tells us how much gas is being dispensed to individual operators but also gives us an accurate indication of the contents of each tank at any one time.
This information allows us to forward plan our gas deliveries in the most expedient way.".
• Marco: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
