Product category:
Liquid Analysis: Titration, HPLC, IC
News Release from: Metrohm UK | Subject: Ecotrode Plus
Edited by the Processingtalk Editorial
Team on 24 February 2006
High specification electrode for a
budget price
The Ecotrode Plus is ideal for routine titrations: the result from the titration is only as good as the electrode you use - any investment in a titrator is negated if an inferior electrode is used
Metrohm is the market leader in titration, however, any investment in a titrator is negated if an inferior electrode is used In short, the result from the titration is only as good as the electrode you use
This article was originally published on Processingtalk on 4 Dec 2006 at 8.00am (UK)
Related stories
Ecotrode Plus precision potentiometric measurement
The continually increasing success of the Unitrode and Aquatrode Plus in pH measurement shows the fixed ground joint is universal in application, largely insensitive to contaminants
Tighter process control in acid pickling baths
Online ion chromatography from Metrohm has enabled tighter process control of acid pickling baths, as the final cleaning stage prior to metal plating
The determination of acidity in soft drinks
Sparkling drinks are the main cause of increasing tooth erosion among teenagers: a study in the British Dental Journal found a strong link between fizzy drink consumption and tooth erosion
The Ecotrode Plus is ideal for routine titrations! The continually increasing success of our Unitrode and Aquatrode Plus range in pH measurement shows that the fixed ground joint is being recognised as the universal diaphragm type.
It is largely insensitive to contaminants and requires only minimal maintenance.
The fixed ground-joint diaphragm is suitable for a wide range of samples, from clear, ion-deficient solutions up to highly concentrated suspensions or emulsions.
Its greatest strength, however, is its precision: The fixed ground-joint diaphragm allows low-noise potential measurements that are only dependent on the ionic strength and stirring speed to a minimal extent, thus meeting crucial requirements for a rapid and precise titration.
In order to utilise the advantages of the fixed ground-joint diaphragm to the full extent in titrations, a new type of membrane glass has also been developed for the Ecotrode Plus, which, in addition to a short response time, exhibits very high endurance.
In short: a membrane glass that does not give up easily, even in continuous use.
The 6.0262.100 Ecotrode Plus is the result of 60 years of experience, ultra-modern production technology, the made in 'Switzerland' label, and our continuous striving to optimise our products.
In many ways this new Metrosensor represents a clear improvement of our well-proven 'workhorse', the 6.0232.100 Ecotrode.
Until the 30th June, the Ecotrode plus is offered at a discounted price of GBP99.
When ordering quote 6.0262.100 PLUS to get the offer price. Request a free brochure from Metrohm UK ...
• Metrohm UK: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page


