Product category:
Liquid Analysis: Titration, HPLC, IC
News Release from: Metrohm UK | Subject: Tin monitoring
Edited by the Processingtalk Editorial
Team on 11 June 2007
Tin cans - a source of food
contamination?
Canning food is a good method of preservation which uses no chemical preservatives and is therefore widely used: Metrohm have a method for measuring tin concentrations in food
Tin cans - a possible source of contamination of canned food Canning food is a good method of preservation which uses no chemical preservatives and is therefore widely used Usually cans consist of tin plate which is tin coated steel
This article was originally published on Processingtalk on 2 Jul 2008 at 8.00am (UK)
Related stories
Tighter process control in acid pickling baths
Online ion chromatography from Metrohm has enabled tighter process control of acid pickling baths, as the final cleaning stage prior to metal plating
The determination of acidity in soft drinks
Sparkling drinks are the main cause of increasing tooth erosion among teenagers: a study in the British Dental Journal found a strong link between fizzy drink consumption and tooth erosion
Tin is necessary to prevent iron from being corroded by the canned food.
Unfortunately tin itself can slowly transfer into the food.
The amount of tin taken up by the canned food is affected by many factors.
Further reading
The new Metrohm 856 conductivity module
The 856 Conductivity Module introduces the new 5-ring conductivity sensors which are far superior to the classical conductivity sensor
pH measurement of ethanol using the Aquatrode Plus
Investigations into the use of the Metrohm Aquatrode Plus electrodes for ethanol pH measurements according to ASTM D 6423 - the pH value is an important quality criterion for bioethanol
Tin may cause stomach upsets and irritates the digestive tract of sensitive people when present in high concentrations.
Fortunately there are no long-term effects due to normal intakes from tin in the food even if it is present in higher levels.
An organic compound can be used to line the cans.
These fully lacquered cans strongly reduce the levels of tin as long as this protective layer remains undamaged.
Nevertheless a new problem arises due to the bisphenol-A which is contained in the lacquer paint and has a potential to interact (endocrine disrupter) with our hormone system.
Voltammetric analysis of tin.
Differential pulse anodic stripping voltammetry (DPASV) in combination with a hanging mercury drop electrode (HMDE) is an analysis method for determining the concentration of tin in canned food.
Prior to the analysis the canned food has to be digested by means of a mixture of concentrated mineral acids.
Lead, which was used with tin until lately as a solder (also for cans), can also be determined with the described method from Metrohm.
There are a variety of methods described which allow a successful determination of lead even in presence of other metal ions as thallium or cadmium.
A specification between Sn(II) and Sn(IV) is also possible.
The anodic stripping voltammetry can be carried out on a MVA-2 system.
The heart of this system is a 797 VA Computrace enriched with the unbeatable Dosino technique for liquid handling.
For your convenience, the methods for the tin and lead determination are already implemented in the Metrohm 797 VA Computrace.
Just press the button and start measuring.
Product information MVA-2 system intended for partly automated routine analysis and consisting of the 797 VA Computrace and two 800 Dosinos.
MVA-2 Options MVA-3 system for fully automated analysis of small series of samples consisting of the 797 VA Computrace, a 813 Compact Autosampler, two 800 Dosinos, a 731 Relay Box and two 772 Pump Units MVA-3.
* Order your free Monograph Practical Voltammetry (8.757.500X) and FREE Application Bulletin 176 from Metrohm. Request a free brochure from Metrohm UK ...
• Metrohm UK: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page


