Echotel 961 - Magnetrol has a new cool sensor

The new Echotel 961 liquid level switch extends its sensor offering with a new stainless steel sensor that handles process temperatures down to -80C

The new sensor is made of standard 316/316L material with special potting material to handle the low temperature.

The standard 961 series offer a broad range of sensors including 316/316L, Hastelloy C, Monel, CPVC, Kynar and 316/316L with 0.5 micron sanitary finish.

Echotel 961 switches utilise state-of-the-art pulsed ultrasound technology to detect the presence or absence of liquid.

The system operates on a twocrystal pulsed or "transmit-receive" principle which applies a 2MHz high frequency electronic burst to the receiving crystal.

The speed of propagation determines the absence or presence of liquid.

By applying pulsed wave technology, the unit is less sensitive to buildup, aeration, foam, and turbulence than most of its competitors.

The 961 typically has a response time of <0.5s and is among the safest overfill preventions of its kind.

With a SFF of > 90%, it can easily be integrated in SIL 1, 2 and 3 loops, depending on the user's safety system and historical experience with the technology.

A dual-point unit also exists with two selectable switch points on the same sensor (Echotel 962) for High and High/High level alarm, Low and Low/Low level alarm or pump control.

The unique features of the 961/962 include adjustable time delay, "on-demand" test buttons for the output signal (alarm and error), LED indication for alarm status, reliability condition and in case of malfunction, identification of the malfunction and separate error signal.

The 961/962 is designed for use in ATEX intrinsically and explosion proof areas as well as CIP/SIP clean environments.

The construction of the device conforms to PED (Pressure Equipment Directive) regulations.

The 961/962 is not sensitive to changing density or other liquid variables and therefore does not require any calibration.

The units can be used on almost every liquid with a maximum viscosity of 10,000 cP, resisting temperatures from -80degC up to +165C and pressures from full vacuum service up to 138 bar.

The 961/962 is also available with relay or current shift output.

Back to top