Product category:
Position, speed and torque measurement
News Release from: Micro-Epsilon UK | Subject: 'EU15 (05)' plus 'optoNCDT'
Edited by the Processingtalk Editorial
Team on 23 November 2006
Sensor measures thickness of wet paint
and tyres
An innovative sensor has been developed, so that automotive OEMs can inspect the thickness of sprayed paint coatings during the spraying process, or tyre rubber depth during moulding
An innovative combination sensor system has been developed, which attaches directly to a robot arm, so that automotive OEMs can inspect the thickness of sprayed paint coatings on vehicle instruments, controls and airbag cladding - during the spraying process itself, whilst the paint is still wet The sensor system is non-contact, easy to mount and offers high accuracy when used against shiny black PU surfaces
This article was originally published on Processingtalk on 16 Jul 2008 at 8.00am (UK)
Related stories
New low cost process controllers and indicators
Five new, low cost process controllers and indicators from Micro-Epsilon offer customers a comprehensive process control solution for all displacement and temperature measurement sensors
Lasers offer high accuracies at large distances
Micro-Epsilon has developed a new range of high performance laser sensors, which offer large stand off or base distances, whilst still maintaining high levels of accuracy and resolution
To perform the required thickness measurements, the Micro-Epsilon 'EU15 (05)' eddy current sensor is used in combination with the Micro-Epsilon 'optoNCDT' laser-based optical triangulation sensor.
The eddy current sensor measures the distance to the spray mould.
The sensor has an opening in the centre, through which the optoNCDT laser sensor measures the distance to the sprayed component.
Further reading
Widest range of inductive displacement sensors
In its latest 52-page catalogue, precision sensor manufacturer Micro-Epsilon offers the widest range of inductive displacement sensors available, with around 250 different standard sensor types
Laser sensor filters out surface defects
A new non-contact laser profile displacement sensor is now available, which uses special software algorithms to filter out interference caused by very small (sub-micrometre) surface defects
Largest choice of current sensors in world today
A new reference guide is now available from sensor manufacturer Micro-Epsilon on the company's non-contact, wear-free eddy current displacement sensors
The eddy currents pass through the sprayed skin to the nickel-coated spray mould.
The laser sensor supplies the reference distance to the skin surface.
These processed signals are then subtracted from one another to provide an accurate measurement of the thickness of the applied paint skin.
In the automotive industry, paint coatings are normally sprayed in a heated mould, using robot-guided nozzles.
Here, tight tolerances are required, particularly with safety-critical parts such as airbag cladding.
For automotive OEMs, this means it is preferable to measure the thickness of the paint skin during the spraying process itself, rather than waiting for the paint to dry.
Up to now, automotive OEMs have been hampered by having to use single eddy current sensors to perform coating thickness measurements.
An eddy current sensor would normally be positioned to touch the paint skin, which could cause damage to the surface of the coating.
Also, companies have had to wait until the paint is dry before taking such measurements.
Several automotive OEMs therefore approached Micro-Epsilon to try to help solve this problem.
The sensor system was developed initially for Belgian company Recticel, who manufactures automotive components such as vehicle dashboards, HVAC systems, seating, head and arm rests and under-bonnet systems.
The company specialises in manufacturing dashboards to house airbag cladding systems.
Ensuring the correct thickness of these skins is crucial to airbag performance and safety.
Prior to using the Micro-Epsilon combination sensor system, Recticel had been inspecting the thickness of dashboards manually with a micrometer after production was complete.
Scrap levels were unacceptably high, so in 2005, the company approached Micro-Epsilon for a solution.
Erich Winkler, product manager optical laser sensors at Micro-Epsilon comments: "Recticel had been using a laser sensor from a US company that just wasn't performing correctly.
After installing our system, their reject and scrap levels have been significantly reduced and their production process is now faster and more efficient.
The robot arm sprays a couple of layers then inspects the thickness of the coating with our sensor system whilst the coating is still wet.
To date, we've sold around 20 such systems to various European automotive companies.
To my knowledge, no other sensor manufacturer is measuring the thickness of coatings in this way," he adds.
The Micro-Epsilon combination sensor system has a measuring range of up to 15mm, although most applications require 2mm or less.
The system has a resolution of 1um and an accuracy of 5um.
The system includes a multi-function controller, adapter board, sensor cable and power supply.
THICKNESS MEASUREMENT OF TYRES.
Utilising the same measurement technology, Micro-Epsilon has developed a system for Poland's leading tyre manufacturer Debica, which measures the thickness of automotive tyre rubber as it is applied to the metal/fabric former.
The system is non-contact and offers high speed measurements in-process in real time, enabling Debica to accurately control the process with very high yield and quality control.
Rubber-coated textile and metal fabrics form the basis of tyre manufacture.
The rubber is applied to the fabric by a 'calendar rolling' process, which demands a uniform layer thickness for high quality tyre manufacture.
The strength and dimensional conformance of the tyre directly depends on this coating process.
Measurement of the thickness of the rubber on both rolls is usually not possible due to the way the calendar is constructed.
Therefore, additional measurements are made at the outlet.
However, two Micro-Epsilon 'optoNCDT' laser-based optical sensors can be positioned above and below the coated fabric web.
The laser sensor is combined with a Micro-Epsilon 'EU15 (05)' flat eddy current sensor, which has a hole in the centre section to allow the laser spot to pass through and onto the wet rubber surface.
A mechanical traversing system enables the sensors to move over the width of the web.
Due to the small measuring spot and the high resolution, it is possible to not only measure the thickness, but also the surface structure of the coated fabric.
The sensors are protected against high ambient temperatures (up to 80C) by a protective housing, which is cooled by compressed air.
Measurement range is 20mm, resolution is 1um and bandwidth is 10kHz. Request a free brochure from Micro-Epsilon UK ...
• Micro-Epsilon UK: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
