Product category:
Process Controllers: PAC, PLC, Loop control
News Release from: Mitsubishi Electric Automation Systems | Subject: Melsec System Q
Edited by the Processingtalk Editorial
Team on 16 November 2004
Demand for flat screens is far from flat
Unaxis, manufacturer of flat screen displays, turned to Mitsubishi Electric when it began to work on their production plant, which had to be able to treble production volumes and keep reducing costs
Automating the manufacture of flat panel display screens for computers, TVs and mobile phones involved consideration of the fact that, like all consumer electronics, sales price was guaranteed to fall month on month as sales volume grew As the world's premier manufacturer of thin film transistor (TFT) displays, Swiss company Unaxis, which employs 6500 people and turns over around GBP1bn, knew that the solution had to be multifaceted
This article was originally published on Processingtalk on 24 Jun 2008 at 8.00am (UK)
Related stories
Single plc controls expanding tank farm site
Mitsubishi plc-based control system ensures optimum materials management at Kingspan Building Products - an ancient application story passed on from Buildingtalk!
Carbon reductions from combined heat and power
Combined Heat and Power (CHP) is high efficiency technology strongly backed by the UK Government, who have set a target of 10,000 MW of installed CHP capacity by 2010
The most important issue was to design a manufacturing system that could easily treble production volumes: this had to be achievable without compromising quality while simultaneously reducing production costs by one-third.
It turned to Mitsubishi Electric when it began to work on the plant, designated KAI 1200, which would allow the production engineers' dreams to be realised and make flat screen technology as common in the average household as the video recorder or microwave oven.
Manufacturing thin film transistors is a complex process using many highly advanced technologies, with several steps needing to take place in high vacuum, where multiple layers of special coatings are applied to glass substrates with microscopic precision.
Further reading
Open Day for Scottish robot centre
Livingston is to play host to some of the finest automation engineers serving Scottish industry on 12 June when Mitsubishi Electric hosts an Open Day at the new Automation Systems Division
Connecting control systems to the internet
Relatively few industrial control systems are currently web-enabled, even though the advantages are clear to see: Jeremy Shinton of Mitsubishi reviews the possibilities
Intelligent automation integrates manufacturing
Mitsubishi has addressed today's business needs for more flexible, efficient and integrated processes with the introduction of the iQ Platform
Unaxis knew that KAI 1200 would have to be fully automated, with no human intervention anywhere in the production process because the glass from which the screens are cut is 1.3m by 1.1m but less than 1mm thick.
The plant is equipped with two parallel process chambers, each fitted with 10 vapour deposition reactors arranged in vertical stacks.
It is 8m wide, 10m long and 3m high and can turn out a completed glass substrate every minute on a continuous running basis, the highest throughput of any plant anywhere in the world.
For automating the processes Unaxis engineers opted for a Melsec System Q automation platform from Mitsubishi Electric and integrated all functions from loading the blanks to unloading the finished TFT screens.
They cited Q' s multi-processor technology as their main reason for the choice, as it could handle the demands of KAI 1200's advanced program structure while maintaining high speed program execution.
The Q PLCs (programmable logic controllers) can handle over 8000 I/O, with processing spread over four CPUs (central processor units) for speed and integrity.
Two motion control, two PC and eight logic CPUs are available, allowing the Q series to be finely tuned to the need of each application.
The multiple processors can be used to simultaneously control different processes or functions.
This innate power within the Q series often means that a single PLC can be used instead of having to network together several less powerful controllers.
The savings in programming, installing and commissioning can be considerable, as can subsequent reconfiguration costs.
KAI 1200 was a development from a previous system, which worked with glass substrates of half the size, yet cost 30 percent more to run.
It is designed so that it can work with substrates of 2m by 2m without alteration as soon as demand increases sufficiently, which is predicted to happen within months of commissioning.
It is also expected that the depositional processes can be refined so that fewer steps are required to complete a TFT.
And finally plans have already been laid down to add further parallel lines to keep up with increasing demand. Request a free brochure from Mitsubishi Electric Automation Systems ...
• Mitsubishi Electric Automation Systems: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
