Product category:
Condition monitoring and vibration analysis
News Release from: Monitran | Subject: VS0004
Edited by the Processingtalk Editorial
Team on 14 March 2008
Raising alarms to protect equipment
Monitran, a world leader in the development and manufacture of sensors for the measurement of vibration and displacement, has launched the VS0004, a complete condition monitoring and alarm module
Fixed to a piece of plant machinery, the VS0004 can respond to a rise in vibration levels in a number of user-definable ways The unit has two alarm levels, with the user able to set Alarm 1 between 1 and 50mm/s and with Alarm 2 capable of being set as a multiple of Alarm 1, either 1.5, 2, 3 or 5x
This article was originally published on Processingtalk on 11 Feb 2003 at 8.00am (UK)
Related stories
Simple pump vibration monitoring probes
The latest eddy current probes from Monitran, for non-contact vibration monitoring of pumps, have been designed to offer reliable AC or DC displacement measurement, with a 4-20mA output
New vibration sensor has choice of output signals
A new vibration sensor is designed to meet the requirements of building service managers, who are using vibration monitoring systems to help provide trouble-free utility services for their workplace
Bob Pickard, Monitran Technical Director, comments: "One option users have is to use Alarm Level 1 to sound an alarm and use Alarm Level 2, with its higher limits, to provide equipment shut down".
Also, the unit has a 4-20mA output scaled to Alarm 2, and so can be interfaced with PLCs or other control circuitry.
The VS0004 contains a double-pole double-throw relay for each alarm level, and the user effectively wires to the normally open (NO) or normally closed (NC) contacts depending on what action is to be taken when an alarm limit is reached.
Further reading
Industrial accelerometer goes to any depth
A new compact industrial accelerometer from Monitran can operate completely submerged to a depth of 100 metres: ideal for vibration monitoring of underwater pumps or in outdoor weather conditions
New vibration sensors meet ATEX directives
The new Monitran family of intrinsically safe vibration sensors meet the latest ATEX European Directive 94/9/EC100a for hazardous areas, which became mandatory on July 1st 2003
The switching capability of each relay is 8A at 240VAC or 30VDC.
The switch module also features a 10 second 'alarm on' time constant and a 30 second start-up delay.
Pickard continues: "The start-up delay is of particular benefit if the unit is attached to machinery which naturally shakes during power-up.
Without the delay, you'd be faced with either accepting a few false alarms or setting your Alarm Levels higher".
The VS0004 is available with latching or non-latching indicators.
Pickard adds: "Latching means the unit alarm level LEDs will remain illuminated even after vibration levels have fallen below their corresponding limits.
This is particularly useful as, under certain circumstances, you may not otherwise be aware that alarm or shutdown conditions had been reached".
A reset button is present on the indicator latching version of the VS0004.
Sealed in a die-cast aluminium enclosure, the VS0004 weighs approximately 0.8kg and measures 80 x 125 x 82mm (depth, width and height, including connectors, respectively).
Its frequency response is 5Hz to 1kHz and its operational temperature range is -10 to 85C.
Pickard concludes: "Whilst there are many vibration switches on the market, few if any offer comparable versatility, or represent such good value for money when one considers that this unit could be used to protect thousands of pounds worth of equipment - to say nothing of sparing a factory the horrific costs associated with unscheduled line or plant shutdowns".
The VS0004 is available immediately and is a fit-for-purpose replacement for its predecessor, the popular Monitran VS0003, and it is worth noting that the VS0004 will be retailing for less than the VS0003.
Optional extras include an external accelerometer and Alarm Latch.
• Monitran: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
