Product category:
Energy management; Boiler plant
News Release from: Moeller Electric | Subject: Power systems overhaul
Edited by the Processingtalk Editorial
Team on 19 January 2004
The show must go on, and on, and
on.......
Rather than a catchy headline, "the show must go on" formed a major part of the Moeller contract when it became involved in the refurbishment of the electrical infrastructure at the National Theatre
The show must go on, and on, and on Rather than being just a catchy headline, "the show must go on" also formed a major part of the Moeller contract when it became involved in the refurbishment of the electrical infrastructure at London's National Theatre
This article was originally published on Processingtalk on 16 Jul 2008 at 8.00am (UK)
Related stories
Moeller Electric ends contactor redundancy!
The new Contactor Monitoring Device (CMD) from Moeller Electric means the expense of using duplicate redundant contactors in motor starters with safety functions can be entirely eliminated
New HMI with built-in Moeller PLC
Versatility, easy programming and excellent connectivity are among the key benefits of the Moeller Electric new easyHMI MFD4, a 5.7" multifunction display unit with built-in PLC functionality
Not only were performances to continue uninterrupted, but Moeller also had to take into account restrictive space and the inexorable flow of the River Thames.
The National Theatre, an iconic landmark on the banks of the Thames, has just benefited from a major overhaul to its power systems.
Phase two, which has just been completed, has brought the entire electrical infrastructure right up to date thanks to the installation of modern hardware designed, supplied and installed by Moeller.
Further reading
Contactors for PFC capacitors on severe duty
There's a bit more to choosing contactors for use in power factor correction systems than might at first be apparent, says Steve Rickard of Moeller Electric
Greencold keeps its cool, with SmartWire wiring
Moeller Electric SmartWire, the innovative panel wiring system, made it possible for refrigeration expert Greencold to use just one control panel instead of the three, and to eliminate a costly PLC
The contract was interesting in a number of ways.
Not only did Moeller take on a lot more project responsibility than was normal, but it also had to overcome a number of major hurdles.
These included restricted spaces within the distribution rooms, the continuous running of the theatre (with up to eight performances per day) and the fact that, if power was interrupted to special pumps, there was the potential for the basement to flood, as part of the building is below the water table.
Moeller was tasked by consulting engineers, Rybka, with upgrading all the power needs from the stage to the offices.
The Moeller solution was to use its Modan modular switchgear and busbar hardware to supply and interlink all of the necessary equipment.
As well as updating the hardware, some of which dated back to the 1960s, Moeller was also able to introduce power factor correction.
Power factor correction, as well as improving the efficiency of the supply, also allows the theatre to realise substantial power savings.
All of the equipment had to be modified to take into account the restrictive space within the switch room.
Antisocial hours were also on the cards as the engineers could only work over long spells after the final show on a Saturday, sometimes starting work after midnight.
"The project went like an absolute dream," says John Moffat, chief engineer at the National Theatre.
"Two years ago we also experienced a fire in our switch room and suffered complete loss of power.
Engineers from Moeller were on site almost immediately and, instead of seven days without power, we only had two.
They did a tremendous job, a job which was also outside the remit of the original contract.".
• Moeller Electric: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page

