Product category:
Position, speed and torque measurement
News Release from: Micromech | Subject: ViX Microstep
Edited by the Processingtalk Editorial
Team on 27 June 2003
Intelligent, well-packaged and good
looking?
The new ViX all-digital stepper motor drive is! This impressive drive also has an innovative current control enhancing torque-speed envelope for optimum performance and a settling time reduced by 75%
What's very intelligent, nicely packaged and good looking too? The new ViX all-digital stepper motor drive! This impressive drive also has an innovative current control enhancing torque-speed envelope for optimum performance and a settling time reduced by up to 75% - increasing production throughput rates The ViX Microstep now available from Micromech packs an advanced motion controller with either a 250VA or 500VA power amplifier into an ultra-compact case - providing a building block that can boost automation throughput while simultaneously reducing system size and cost
This article was originally published on Processingtalk on 15 Sep 2003 at 8.00am (UK)
Related stories
It's time for 'rack and rail' guiding systems
In the handling and automation industry ever increasing use is being made of linear guiding systems with additional special features: Monorail BZ35 gives a combination of quality and economy
New positioning tables for automation at low cost
Micromech has a cost-engineered version of the highly popular 400XR series of linear positioning tables, aimed specifically at factory automation applications with variable axial accuracy requirements
The raw performance of the power stage is intelligently controlled using innovative new digital signal processing techniques.
Advanced field-orientated control (FOC) is applied to the digital current loop to enhance the torque-speed envelope.
This has the effect of eliminating 'midrange instability', and reducing torque ripple - leading to improved low-speed smoothness.
Further reading
Micro-stepping drive has 'servo like' performance
The P7000 from Danaher Motion has open loop stall detection and so combines all the advantages of a stepper system but can perform like a servo drive arrangement
Trio's motion controller in the Danaher Servostar
What's got into the Danaher Servostar? Trio's motion controller, that's what! In the Danaher Servostar digital drive it provides an easy to use 1.5 axes motion controller with sophisticated features
Motion in a language PLC programmers understand
The Compax 3 is a third generation intelligent servo drive with a modular structure control that has IEC61131-3 and PLCopen that makes it ideal for use in a wide range of different applications
Furthermore, the innovative 'intelligent damping' control typically reduces settling time by up to a factor of four - significantly enhancing throughput for precision equipment OEMs.
ViX Microstep drives are packaged in the same exceptionally compact book-style housing as the ViX servo drive - measuring just 125 x 42 x 85 mm - for direct panel mounting, or attachment to a standard DIN rail using an optional adaptor.
The drive is available with a choice of 2.8Arms or 5.6Arms output current ratings, and accommodates motor bus voltages up to 80VDC.
To ensure smooth operation at all times, the power stage operates at its full 51,200 step/revolution resolution regardless of the actual steps/rev programmed by users.
Moreover, the user resolution is freely-programmable in the range from 400 to 51,200 steps/rev, allowing the motion system to be matched precisely to the mechanics, even where there is an odd transmission ratio or lead-screw pitch.
The drives can be commanded directly from a PC, a centralised control system generating industry-standard step-direction signals, or optionally a fieldbus system.
In addition they will operate autonomously using motion control programs stored within their powerful built-in controller - these may be executed in response to external events, or signals from a host controller such as a PLC.
The built-in controller uses the well-proven EASI command language, and supports all standard motion control functions.
In addition, a number of advanced functions such as electronic gearing, registration, closed-loop position maintenance and stall detection are offered.
The controller is equipped with an RS232C interface as standard, and optionally a fieldbus interface for CANopen and RS485 communications.
Standard I/O facilities include 5 digital inputs and 3 digital outputs, all of which offer software-configurable termination characteristics and 5V or 24V operation.
Rapid system configuration and programming of ViX Microstep drives is achieved by using the EASI front-end software package.
This powerful Windows-based software tool makes extensive use of guided-wizards and simple hierarchically-structured pull-down menus to simplify configuration and programming.
When the drives are used with certain recommended stepper motors, users only need to select the motor from a menu to define the entire configuration; as all set-up information is retrieved automatically from a built-in database.
The drive automatically optimises FOC control according to motor parameters that are entered either directly, or through selecting the appropriate motor model using EASI software.
This enables a wide range of motors to be accommodated without compromising performance.
The result is unsurpassed torque/speed performance, smooth and resonant-free operation at low speed, reduced torque ripple and significantly reduced settling times - permitting increased production throughput - together with improved efficiency and quieter operation.
• Micromech: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
