Product category:
Positioners, servo drives
News Release from: Micromech | Subject: LEZ series
Edited by the Processingtalk Editorial
Team on 29 January 2007
New linear timing belt actuator for fast
movements
The new LEZ series actuators from Micromech have been designed for quick and accurate positioning and are available in lengths of up to 6m in a moving or stationary timing belt version
The new LEZ series actuators from Micromech have been designed for quick and accurate positioning and are available in lengths of up to 6m in a moving or stationary timing belt version These fast actuators are of an aluminium profile and have a repeatability of less than or equal to +/- 0.2 mm and a limit and/or reference switch accuracy < 0.1 mm
This article was originally published on Processingtalk on 27 Jun 2003 at 8.00am (UK)
Related stories
Intelligent, well-packaged and good looking?
The new ViX all-digital stepper motor drive is! This impressive drive also has an innovative current control enhancing torque-speed envelope for optimum performance and a settling time reduced by 75%
It's time for 'rack and rail' guiding systems
In the handling and automation industry ever increasing use is being made of linear guiding systems with additional special features: Monorail BZ35 gives a combination of quality and economy
The fixed timing belt version has the motor mounted on the carriage making them ideal for achieving maximum travel in a constricted space.
Both the moving and fixed units are suited for spraying and coating applications.
The first two versions both provide a feed per revolution of 70 mm, clearance-free feed with timing belt feed axis.
The timing belt has a tooth pitch 5 mm and width of 25 mm.
The LEZ6 has a moving toothbelt, a bearing carriage WS 3 L 96 x W 130 mm and can carry loads of up to 24kg and achieve a feed maximum of 5 m/s.
The LEZ7 has the fixed timing belt and a feed maximum of a speedy 1.5 m/s carrying loads of 24kg on two bearing carriages of the same size as above.
For the other two models the feed per revolution is 60 mm and the timing belt has 3 mm teeth, width 15 mm.
The LEZ9 with the moving toothbelt the carriage is WS 3 L 96 x W 95 mm and has a maximum feed of 2.0m/s, loads up to 24kg.
The LEZ8 with the fixed timing belt is again a 2 x bearing carriage WS 11 L 96 x W 95 mm and has an impressive feed of 1.0 m/s with a load of 24kg.
Special lengths are available in steps of 100 mm to a maximum of 6,000 mm, drive modules are attachable on both sides and over travel limit switches with connection cable can be fitted in combination with the drive module.
• Micromech: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
