Product category:
Positioners, servo drives
News Release from: Micromech | Subject: 1FT7 servo
Edited by the Processingtalk Editorial
Team on 12 March 2007
High-performance servo motor is compact
Now available from Micromech is the new compact 1FT7 servo motor for high-performance applications in production machinery and demanding mechanical handling equipment
Now available from Micromech is the new Siemens compact 1FT7 servo motor for high-performance applications in production machinery and demanding mechanical handling equipment The servo motor series is characterised by its high dynamic response and its compact design
This article was originally published on Processingtalk on 27 Jun 2003 at 8.00am (UK)
Related stories
Intelligent, well-packaged and good looking?
The new ViX all-digital stepper motor drive is! This impressive drive also has an innovative current control enhancing torque-speed envelope for optimum performance and a settling time reduced by 75%
It's time for 'rack and rail' guiding systems
In the handling and automation industry ever increasing use is being made of linear guiding systems with additional special features: Monorail BZ35 gives a combination of quality and economy
With this new servo motor, even the self-cooled version has an overload withstand capability of four times the standstill torque M0 throughout the speed range which goes up to a useful 6000 rpm.
In field weakening mode, it can be additionally expanded with inverters of the Sinamics S120 series.
Productivity is therefore increased as machines can now be used over an expanded load range.
With the requirement for less downtime the service life of the encoder is also significantly increased thanks to a newly developed coupling which protects the incremental encoders against shock loads on the motor shaft.
The cross profile of the new motors also enables simple installation even from the rear, whilst a rotatable, fast locking connector simplifies connection and cable laying in all installation positions.
This helps reduce both installation as well as service times.
Compared to its predecessor the successful series 1FT6, the length of the 1FT7 has been reduced by one third.
However, both models are compatible with regard to installation, connections and characteristic curves so there is no problem in replacing the predecessor model with the 1FT7.
The motors are permanent magnet synchronous motors, a visually attractive design, whose tried and tested cross profile has true running and positional accuracy technology.
On account of having minimal ripple and torque oscillations they can achieve the highest surface quality on the work-piece.
They are optimised for use in the Siemens fully digital drive and control systems.
This first generation of 1FT7s are self-cooled motors with shaft heights ranging from 48 to 100mm, they have a rated speed of 1500 to 6000 rpm, rated power of 0.85kW to 10.5kW and static torque 3 to 70Nm.
Typical fields of application are high-performance motion control and positioning for production machines such as packaging machines, textile machines, foil drawing plants and printing presses; also in material handling, manipulating devices and feed drives in high-performance machine tools.
• Micromech: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
