Product category:
Pumps, Vacuum pumps
News Release from: Obart Pumps | Subject: Pedrollo submersibles
Edited by the Processingtalk Editorial
Team on 24 February 2006
Pedrollo advanced technology submersible
pumps
Pedrollo submersibles, with a worldwide reputation for technology in both manufacture and application, have now been added to the range from Maidstone based specialist pump distributor, Obart Pumps
Pedrollo submersibles have a worldwide reputation for their high level technology in both manufacture and application, so Maidstone based specialist pump distributor, Obart Pumps, has now added a broad range to its catalogue Matthew Hill, Obart Pumps MD comments: 'Over the years we have supplied Pedrollo pumps when appropriate; reliability has always been excellent and performance has often exceeded expectations
This article was originally published on Processingtalk on 11 Jul 2006 at 8.00am (UK)
Related stories
'Poma' submersible pump suited to narrow sumps
The new Tsurumi 'Poma' submersible pump produces an exceptionally large flow from its highly efficient 150W motor, making it ideal for continuous running and many other industrial applications
Controller brings flexibility in motor protection
The new ABB Universal Motor Controller, UMC22, offers a powerful and flexible intelligent control device for motor protection applications, and is designed for use with the new ABB Fieldbus Plug
Robot programming time reduced from weeks to days
ABB, the global power and automation technologies group, introduces TeachSaver, a new software product that can dramatically reduce robot-programming time from weeks to days - or even hours
As a company we are constantly reviewing our product portfolio to ensure we are offering the best range available to our customers.
Our increasing confidence in Pedrollo led us to believe this was the right time to introduce a number of carefully selected products into our catalogue'.
In particular the RX models are sure to generate interest.
Manufactured in corrosion resistant 304 stainless steel these pumps are designed for clean and dirty water pumping in many process applications.
They will handle suspended soft solids up to 10mm in diameter - for larger solids up to 40mm, versions incorporating a vortex impeller can also be offered.The top discharge design makes the RX ideally suited for partial immersion applications and where space or access is restricted - top discharge eliminates the likelihood of air locks, a not uncommon problem, experienced with side discharge pumps when being used in such situations.
A 416 stainless shaft is fitted with a mechanical seal for greater reliability and longer life, along with with an intermediate oil chamber and inner lip seal providing wear resistance and protection in the event of dry running.
Maximum liquid temperature is 50 degrees C, though limited use up to 90 degrees C is possible for short periods.
A choice of manual or automatic versions in 110 and 230 volts and manual versions in 400 volts enables the RX range to provide cost effective pumping solutions with excellent service and consistent operation in challenging environments.
Head heights up to 23 metres can be accommodated with flows from 140l/min to 450l/min.
The complete Pedrollo range can be seen in the latest Obart newsletter, in the 2006 catalogue, or on the website.
• Obart Pumps: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
