Product category:
Air handling: Dust + Fume extraction
News Release from: OK International | Subject: BTX-208 Fume Extraction System
Edited by the Processingtalk Editorial
Team on 12 April 2005
New Fume Extraction System
OK International will launch the Metcal BTX-208 Fume Extraction System, stand number G610, which incorporates high performance extraction of solder fumes direct from the tip of a hand soldering iron
OK International will launch the Metcal brand BTX-208 Fume Extraction System, at stand number G610 at Nepcon 2005: the BTX-208 incorporates high performance extraction of solder fumes direct from the tip of a hand soldering iron Thanks to the integration of a high pressure, low volume air pump, the system can be easily configured to form an extraction network for up to eight workstations
This article was originally published on Processingtalk on 4 Jul 2006 at 8.00am (UK)
Related stories
Easy transition to lead-free soldering
OK International announces a series of enhancements that optimise existing Metcal MX-500 and SP200 systems for a simple, cost-effective transition to lead-free soldering
Based on the technology of the Metcal successful BVX-200 portable two-arm system, this new model is engineered to provide the high vacuum required to draw air through the narrow tip extraction tubes employed in precision soldering applications.
To suit soldering and rework environments a pre-filter is followed by a main filter offering HEPA efficiency exceeding 99.97 per cent, plus an activated carbon filter to remove gases.
Both pre and main filters can be changed independently to maximise the working life of each filter and lower the total cost of ownership. Request a free brochure from OK International ...
• OK International: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
