Product category:
Couplings, Seals, Gaskets
News Release from: Bio-Chem Valve and Omnifit | Subject: Gripper fitting
Edited by the Processingtalk Editorial
Team on 16 July 2003
Grippers make short work of fluid
transfer problem
Omnifit has helped a spectrophotometer manufacturer solve a fluid transfer problem in the flow cells of one of its instruments by custom-designing a tubing assembly with leak-tight gripper fittings
Omnifit has helped a spectrophotometer manufacturer solve a fluid transfer problem in the flow cells of one of its instruments by custom-designing a tubing assembly with leak-tight gripper fittings Each flow cell consists of a glass tube held in an aluminium housing
This article was originally published on Processingtalk on 23 Aug 2006 at 8.00am (UK)
Related stories
Gripper fittings for connecting laboratory tubing
The new unique gripper fittings for connecting laboratory tubing offer zero dead volume at pressures up to 1000psi, with a chemically inert PTFE washer, press-fitted into a 316 stainless steel housing
Precision glass columns for chromatography
The new Omnifit high precision glass chromatography columns provide a complete solution for virtually all low- and mid-pressure liquid chromatography applications
Bubble trap eliminates air pollution effects
A unique device for removing in-line gas and air bubbles in laboratory tubing is now available from Omnifit.
The requirement was for a PTFE tubing assembly with fittings that would seal to the glass surface of the flow cell while accommodating variations in the alignment between the cell and its housing.
The dimensions of the flow cell tubing: 1.6mm OD and 1.0mm ID.
Each flow cell required two tubing assemblies, and due to the very tight space limitations on the top of the cell where the connections are made, the design also needed to ensure that it was easy for the operator to use.
The solution from Omnifit was a gripper fitting with a stainless steel case and a PTFE seal insert.
When assembled onto the glass tube of the cell, the PTFE 'cold flows', forming a secure seal on the glass surface.
There were slight variations in the alignment of the glass within the cell which could have made sealing difficult; this was overcome by fitting an o-ring between the gripper and the tube end fitting, allowing the gripper to align with the cell independently of any variations in the alignment of the housing.
The end of one fitting was also made slightly longer than the other to allow easy assembly, and the fittings were colour-coded for simple identification.
The initial prototypes were presented to the customer as e-drawings and animated CAD models.
These provided highly accurate information for assessment by the customer and also dramatically reduced the lead-time to the production of prototypes.
Omnifit has been a specialist designer and manufacturer of inert fluidic components for over 30 years.
Its custom products for instrument manufacturers include fittings, tubing sets, manual and electric valves, bottle caps and chromatography columns.
When designs are approved, Omnifit manufactures to meet the customer supply chain requirements for scheduled, Kanban or JIT delivery.
• Bio-Chem Valve and Omnifit: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
