Remote I/O for efficient high-performance control

Omron, a global leader in industrial automation, has introduced the first I/O (input/output) modules for CompoNet - a new Open DeviceNet Vendors Association compliant control network

Omron, a global leader in industrial automation, has introduced the first I/O (input/output) modules for CompoNet - a new Open DeviceNet Vendors Association (ODVA) compliant control network.

Combining simplicity with high speed and ample capacity, CompoNet will save time and reduce complexity in the development process for machine builders.

CompoNet is based on CIP (Common Industrial Protocol) - an open communications standard designed for industrial applications.

It has recently been included in the CIP networks family as promoted by the ODVA.

The ODVA controls the specification and device certification for all CIP-based devices to ensure plug-and-play inter-operability.

Omron is one of the four founding members of the ODVA, an organisation which now boasts three hundred member companies which are actively developing a wide variety of products built to these standards.

By combining proven CIP technology with experience in machine automation, Omron has developed CompoNet as an efficient solution for networking smart sensors, actuators and remote (I/O) devices.

The network-independent CIP messaging gives users access to intelligent field devices from anywhere in their control system without having to write a single line of communication code in a controller.

For machine builders, development time will be shortened, wiring is reduced and troubleshooting and maintenance are simplified.

Fast and efficient, CompoNet can support an I/O capacity of up to 384 slaves with a guaranteed cycle time of less than 1 millisecond for a thousand digital I/O points, as well as provide acyclic message transfer to configure and monitor more complex field devices.

The Omron initial product range for CompoNet comprises master units for CJ1 and CS1-series programmable logic controllers (PLCs), remote I/O modules with ingress protection classes IP20 and IP54, plus a full range of cables, connectors, repeaters and software tools.

The unique IP54 I/O units provide a simple and cost-efficient solution for field-mounted I/O in damp or dusty environments by using standard I/O connection technology protected by a tough housing.

The CompoNet system includes flat cable and isolation-displacement connectors for both IP20 and IP54 application areas.

With power and communication combined in a single cable, installation is fast and faultless.

Branch connectors enable devices to be easily added or removed for maintenance and troubleshooting.

As an alternative to the flat cable, simple twisted-pair cabling can be used, with each node powered individually.

Repeater units extend the range of CompoNet to up to 1500 metres and can link sections of different cable types, allowing for mixed topology networks.

Up to 63 repeaters are allowed in one network.

The freedom to branch the CompoNet cable to wherever you need it can provide significant reductions in I/O wiring.

Using repeaters, and "bit slaves" with IP20 or IP54 protection rating, small numbers of I/O points are easily spread over large areas, such as in warehouses or on conveyor systems.

Setting up a CompoNet network takes just seconds.

Simply select the master unit communication mode and speed on the front panel and the unit automatically scans the network after power-on.

Using the Omron free software tool, you can access all CompoNet devices via any connection path to the PLC for troubleshooting and maintenance work, helping to identify wiring faults, power failures or machine malfunctions.

All Omron CompoNet slaves contain Smart early-warning functions that continuously monitor status and performance, and allow each part of a machine or system to be easily diagnosed.

Paul Downey, marketing manager, Omron Industrial Automation commented: "CompoNet will break new ground for machine builders, as it will decrease complexity and development time compared to conventional networks.

It allows more flexibility to build it into their designs, as well as achieving instant troubleshooting and diagnostics.

We are very pleased to be demonstrating CIP and CompoNet capabilities.".

Back to top