Product category:
Web interrogation and phone messaging
News Release from: Omniflex (UK) | Subject: Teleterm Silent Sentry
Edited by the Processingtalk Editorial
Team on 28 July 2005
SMS Alarm Monitor informs the right
person fast!
The Teleterm Silent Sentry is a new low cost, state-of-the-art Alarm Monitor capable of monitoring a wide range of input types and sending SMS Alarm messages upon detection of an alarm condition
The Teleterm 'Silent Sentry' is a new low cost, off the shelf, state-of-the-art Alarm Monitor capable of monitoring a wide range of input types and sending SMS Alarm messages upon detection of an alarm condition The Silent Sentry has 12 direct Binary or Analogue Inputs, plus a Modbus port allowing alarms from a variety of sources to be monitored
This article was originally published on Processingtalk on 22 Feb 2007 at 8.00am (UK)
Related stories
Sitewide medical alarm monitoring
The Teleterm Silent Sentry module from Omniflex is a low cost, state-of-the-art alarm monitor ideal for sitewide Medical Alarm Monitoring
Up to 64 different messages can be sent from one unit.
It can be configured to dial out to up to 10 message recipients (ie 10 phone numbers), each in one of three escalating priority groups.
This allows messages to be sent to a selected group of recipients, and if not acknowledged within a set time, then sent to the second group of recipients, and if still not acknowledged, then sent to the third group of recipients.
The Silent Sentry is easily configurable by the user, using the free Omniset configuration software.
Using Omniset PRO software, it can even be configured remotely over the GSM network.
The Silent Sentry can be connected to any existing alarm annunciator system and can also be used to remotely acknowledge alarms using a mobile phone. Request a free brochure from Omniflex (UK) ...
• Omniflex (UK): contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page

