Product category:
Liquid Analysis: Turbidity, Particles
News Release from: Optek-Danulat | Subject: DTF16 Haze Control
Edited by the Processingtalk Editorial
Team on 16 November 2005
New Optek dual angle, in-line
turbidimeter
The DTF16 Haze Control is a precise, inline turbidity measuring system featuring an advanced, triple-beam optical design
The DTF16 Haze Control is a precise, inline turbidity measuring system featuring an advanced, triple-beam optical design Sensitive forward scatter (11degree) and standard side scatter (90degree) measuring angles allow the DTF16 to effectively measure a broad range of particles that contribute to turbidity and fine haze in the line
This article was originally published on Processingtalk on 29 Aug 2006 at 8.00am (UK)
Related stories
In-line optical concentration sensor
The optek model AF26 is a dual channel absorption sensor designed to automate manual processes and offer increased control of in-line applications
Oven temperature controllers
ABB Automation Technologies has supplied 12 ControlIT C351 single loop process controllers to Belgian chemical company Tessenderlo Chemie NV, to control six ovens in a continuous sulphate process
ABB adds single input versions to analyser range
ABB has launched single input versions of its AnalyzeIT AX400 pH/Redox and Conductivity analysers, with three alarm set points as standard
A combination of precise scattering light optics and optimised sensor body geometry prevents external or internal stray light from affecting the measurement.
Variable disturbances, eg sample colour, colour changes, and lamp variations have no influence on the measured value.
Maintenance is minimal, since the DTF16 features a drift-free factory zero point and drift-free calibration.
The rugged sensor body is constructed of sanitary stainless steel and is suitable for CIP/SIP.
Welding armatures are available in nominal sizes of DN50 - DN125.
Weld ends allow adaptation to any pipe/tube standard.
The DTF16 provides a stable and repeatable measurement that is ideal for filter control applications such as final QA/QC in package release lines.
The dual-angle analysis provided by the DTF16 is valuable for other process areas such as centrifugal clarification of extracts or filter cellars.
Drift-free factory zero, drift-free calibration, low maintenance and long-term stability make the DTF16 particularly well suited for use across multiple location and plants.
The DTF16 also works well with other optek instruments such as the dual channel TF16 turbidimeter and DT9011 lab turbidimeter.
• Optek-Danulat: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
