Product category:
Welding, cutting and adhesive bonding
News Release from: Orbimatic | Subject: Orbiweld TP
Edited by the Processingtalk Editorial
Team on 12 June 2003
New compact open arc weld heads
Orbimatic, manufacturers of high precision orbital welding equipment, have introduced the new concept Orbiweld TP Open Arc Weld Heads to their range of equipment
The Orbiweld TP range is a major technology breakthrough in the concept of Open Arc Weld Heads This completely unique drive mechanism and the intelligent design of these heads has allowed Orbimatic produce these heads which are much more compact than any other design of similar weld head and have no awkward motor housing in the way
This article was originally published on Processingtalk on 21 Sep 2004 at 8.00am (UK)
Related stories
Open arc orbital TIG welding head range complete
Orbimatic GmbH has launched the last two models in their Orbiweld TP range of open arc orbital TIG welding heads, to cover an impressive range of tube and pipes from 10mm to 275mm outside diameter
This new design makes the heads not just easy to handle and comfortable to use but very robust and hard wearing.
The heads also have a simple and easy to use clamping mechanism which again is a new concept and allows a single head to be used on a wide range of tube diameters without any lose of weld quality.
The Orbiweld TP range will cover tube and pipe sizes up to 10 inches, and they can be used for welding tubes, pipes or fittings with little effort.
The heads can be used with or without an additional wire feed unit and incorporate a profile compensation mechanism which takes into account any ovality in the tube or pipe profile.
If you have been considering the purchase of Open Arc Orbital Welding Equipment then take a look at the Orbiweld TP and get a pleasant surprise.
• Orbimatic: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
