Product category:
Plant Design and Construction
News Release from: Orbimatic | Subject: ORB1000 Oxygen Analyser
Edited by the Processingtalk Editorial
Team on 25 June 2003
Monitor ensures welds are clean
Orbimatic have introduced the ORB1000 Oxygen Analyser into their range of equipment, for monitoring oxygen levels in welding purge gases
Orbimatic have introduced the ORB1000 Oxygen Analyser into their range of equipment The ORB1000 is supplied in a robust ABS case, which houses the main unit and all accessories
This article was originally published on Processingtalk on 13 Jan 2003 at 8.00am (UK)
Related stories
How to achieve a new and clean process line
When planning an installation of a new stainless steel process pipe line it is important to understand the importance of using the best materials and techniques to ensure it is clean when installed.
The unit interfaces directly into the Orbimat C range of orbital welding power supplies with no additional interfacing required.
This can be used to ensure the internal purge of a tube is pure before welding can commence.
The ORB1000 uses a long life heated zirconium sensor which a life expectancy of at least five years.
The easy to use menu driven software makes operation of this unit a welder's dream.
An audible alarm is also included to alert the welder should the oxygen level of the internal purge rise during the welding cycle.
The unit will measure down to 1ppm and is calibrated down to 10ppm and starts measuring at around 0.1%.
The sensor reacts instantly to change in oxygen level and displays shows changing level instantaneously.
As well as being used with the Orbimat C orbital welding power supplies the unit can be used as a stand-alone unit for connection to welding systems or enclosures.
• Orbimatic: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
