Product category:
Welding, cutting and adhesive bonding
News Release from: Orbimatic | Subject: Tiger tube and pipe welding station
Edited by the Processingtalk Editorial
Team on 18 May 2004
Tiger tube and pipe welding station
The 'Tiger' Welding Station has been designed for the pre-fabrication of tube and pipe work
The 'Tiger' Welding Station has been designed for the pre-fabrication of tube and pipe work The 'Tiger' welding station incorporates a tube/pipe clamp which is located on a 'Easi-Glide' X-Y slide
This article was originally published on Processingtalk on 13 Jan 2003 at 8.00am (UK)
Related stories
How to achieve a new and clean process line
When planning an installation of a new stainless steel process pipe line it is important to understand the importance of using the best materials and techniques to ensure it is clean when installed.
The clamp also rotates to allow 45 and 90 degree elbows to be welded to tube lengths.
The 'Tiger' head stock uses an internal purging and clamping mechanism which allows tube to be welded to fittings or even allows fittings to be welded to elbows.
As well as clamping the tube and fitting the internal clamping system will also remove any slight ovality from the tube and produce a perfect joint fit-up.
The head stock can also be fitted with studs when producing tube with bolted flanges to give perfect alignment of bolt holes to make fitting easy on site.
The 'Tiger' Welding Station makes it easy for a single operator to handle 6 meter lengths of tube or pipe during the welding operation.
When connected to an Orbimat C orbital welding power supply you have the ideal welding station.
• Orbimatic: contact details and other news
• Email this article to a colleague
• Register for the free Processingtalk email newsletter
• Processingtalk Home Page
Search the Pro-Talk network of sites
